Skip to main content
Topic: woo-hoo halo headrests!!! now... (Read 3510 times) previous topic - next topic

woo-hoo halo headrests!!! now...

How do I get my friggin old headrests off!?!?!? I tried yanking em off, no dice. Sticking a screwdriver in there... too round. Shaking em... nothing... sticking the screwdriver back in there... hmmm... it seems to be getting worse. What is the proper procedure here? After years of searching and giving up I finally got my own set of halos and now I can't even get put them in. Interior parts always kick my arse before I end up destroying them. =/

Hizzelp. :D
2005 Subaru WRX STi|daily driver

woo-hoo halo headrests!!! now...

Reply #1
When I removed the seat skins from the seats in my '96, the headrests were held in with clips. The clips are only accessible when the seat skin is removed (and foam).
Are the Fox seats the same? I have NO idea... but it's worth investigating.
[SIGPIC][/SIGPIC]

woo-hoo halo headrests!!! now...

Reply #2
Darkthunder, I could take my pass. side TC seat apart to see, if ya want me to, but if it takes any tools, I'm gonna be up the crick, they're at work, lol...
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

woo-hoo halo headrests!!! now...

Reply #3
Quote from: FordTruckFreeek
Darkthunder, I could take my pass. side TC seat apart to see, if ya want me to, but if it takes any tools, I'm gonna be up the crick, they're at work, lol...

If you could that would be great. :D Thanks.
2005 Subaru WRX STi|daily driver

woo-hoo halo headrests!!! now...

Reply #4
you need too slide a flat peice of metal or something down the back of the aluminum thingie behing the headrest into the back of the seat in that little channel.....
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

woo-hoo halo headrests!!! now...

Reply #5
Yeah, you'll have to do as they indicated, and take your upper seat skins off to access the headrest clips, it's not a bad job, either...
BTW, what did ya get your halo headrests from?
I got a set of seat from my escort GT, that I'm gonna pull out of my mud truck, and put away.(while their still clean)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

woo-hoo halo headrests!!! now...

Reply #6
when i did mine i used a hacksaw blade  it was flat enough to slide in and release the clip..  on the backside of the headrest.!!!!!!!!!1


woo-hoo halo headrests!!! now...

Reply #7
I think MDJ1281 removed his some time ago too.
"lol.. because not too many people care for that style of car"
[size=-2]Click on paw print \/[/size]


 

woo-hoo halo headrests!!! now...

Reply #8
At the bottom of the headrest shaft (front side) there is a horizontal groove to which a spring loaded tab recesses into. By sliding a Slim Jim  (or hacksaw blade) down the "front" of the headrest (headrest all the way up) at this point the tool being used will bottom out. Push down with alittle more pressure while slowly pushing the headrest down 2"-3", this will force the blade past the tab....at this point while holding the blade in place the headrest will pull right out.

woo-hoo halo headrests!!! now...

Reply #9
Quote
horizontal groove to which a spring loaded tab recesses into.
And if you rip off the fabric, it looks a little something like...
.
Death awaits you all with nasty, big, pointy teeth.

1988 5.0 Bird, mostly stock, partly not, now gone to T-Bird heaven.
1990 Volvo 740GL. 114 tire-shredding horsies, baby!

woo-hoo halo headrests!!! now...

Reply #10
Quote from: thundergrowl
At the bottom of the headrest shaft (front side) there is a horizontal groove to which a spring loaded tab recesses into. By sliding a Slim Jim (or hacksaw blade) down the "front" of the headrest (headrest all the way up) at this point the tool being used will bottom out. Push down with alittle more pressure while slowly pushing the headrest down 2"-3", this will force the blade past the tab....at this point while holding the blade in place the headrest will pull right out.

Wow, that worked to perfection. Thanks thundergrowl and masterblaster and everybodies. :D
2005 Subaru WRX STi|daily driver

woo-hoo halo headrests!!! now...

Reply #11
Picture?

woo-hoo halo headrests!!! now...

Reply #12
trade you the 3G for those ;)
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

woo-hoo halo headrests!!! now...

Reply #13
Quote from: thundergrowl
Picture?

It'll be monday before I can get any pics, I'm in AL right now.
 
Quote from: shame302
trade you the 3G for those ;)

although tempting, i searched too long for these bad boys. :D
2005 Subaru WRX STi|daily driver

woo-hoo halo headrests!!! now...

Reply #14
it...worth a try....why the heck are they so hard to find anyway...didnt quite a few escorts mustangs and capris have them?
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~