Beginnings of Steel cowl hood pics.

Topic: Beginnings of Steel cowl hood pics. (Read 1829 times) previous topic - next topic

Beginnings of Steel cowl hood pics.

November 01, 2005, 07:20:48 PM

Here are the pics of the cowl hood I am making. So far it isn't much but a chopped up hood, but it is a start.

I am making a detailled guide on how to make one yourself. Hoping to complete it soon. Now that I'm back in a Fox bird I am getting more into them again.

Beginnings of Steel cowl hood pics.

Reply #1 – November 01, 2005, 08:19:29 PM

another one huh? excellent man!

Beginnings of Steel cowl hood pics.

Reply #2 – November 01, 2005, 08:42:29 PM

looks good, we found out that it starts to get harder when you try to shape the cowl. i thought it would be alot easier, but forming the sides to the top at an angle and tapering it to the front proved to be a little harder than my friend and i wanted to go with his car. good luck, i realy want to see how you go about do'n it being as we gave up on it lol.

Beginnings of Steel cowl hood pics.

Reply #3 – November 01, 2005, 10:42:31 PM

always fun to start a new project here is the last one i built 100% fabricated out of steel 7" cowl scoop :D

Beginnings of Steel cowl hood pics.

Reply #4 – November 01, 2005, 11:48:20 PM

When I do mine, I will be modifying a header panel as well so it has a better transition...just don't know whether or not to use my original hood/header panel or the t/c hood and pick up a t/c header panel.

Beginnings of Steel cowl hood pics.

Reply #5 – November 02, 2005, 09:38:33 AM

yeah, i like a more progressive smoother look to a cowl. im either gonna experiment with clay wich i have little experiance with or more likely foam jigging and cutting/epoxy, and mylar with kevlear and fiberglass to make a plug. who knows if anything comes of it though.

Beginnings of Steel cowl hood pics.

Reply #6 – November 02, 2005, 08:12:48 PM

yeah shaping the sides is definatly the worst part. If I had a sheet metal brake it would be easier to form them..... Hmmmm... next project to make/buy. This hood will be 3 1/2 - 4" I have been thinking about making a cobra R type hood for these, but that is twice the sides to bend and one bend on each side is bad enough.

Sleeper, aside from that hood being on a chevy, that looks pretty good.

Beginnings of Steel cowl hood pics.

Reply #7 – November 03, 2005, 12:29:00 AM

If I can get ahold of a TC Hood for my project. Im gonna try to make a cowl of sorts off of the scoops. Kinda like oldraven but a little more mild.

Beginnings of Steel cowl hood pics.

Reply #8 – November 03, 2005, 12:11:12 PM

Quote from: cougrrr302

If I can get ahold of a TC Hood for my project. Im gonna try to make a cowl of sorts off of the scoops. Kinda like oldraven but a little more mild.

Beginnings of Steel cowl hood pics.

Reply #9 – November 04, 2005, 12:32:31 AM

It's always nice to be noticed, but I have a stock hood. The strange part is I did a mock up for a cowl drawn in dust exactly like 1WLD BRD sketched in the first pic, maybe a month and a half ago. :D Scoops and all. At least now I'll have an idea of how it will look.[/QUOTE]

Oh shiznit. After being on here this long and when you made that comment I realized that it was a shadow. . Well At least in my mind(I dont know how I did it) saw your hood differently, It gave me a few ideas.