1986 XR7 351 turbo swap.... Reply #150 – October 28, 2013, 11:35:02 AM Don't know how I missed this build. Great work, I look forward to seeing it finished! Quote Selected
1986 XR7 351 turbo swap.... Reply #151 – November 19, 2013, 04:34:27 PM Where you at now on it? Quote Selected
1986 XR7 351 turbo swap.... Reply #152 – November 24, 2013, 11:12:24 AM Trying to figure out the last two wires on my original 1986 2.3T engine harness. When I removed the original 2.3T I disconnected the alternator from the engine harness not leaving the alternator pigtail that all the 3G swap directions explain to to use...been abit stuck. I purchased a 1996 Caprice 9C1...that needed some attention to get up to Daily Driver status. So I haven't worked on the XR7 in 2 months. But im out of time...the snow is coming so Im getting my ducks in a row to get this car started next Saturday.ereHere is the post from turboford.net http://forum.turboford.org/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=2&t=057375Thanks,Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #153 – November 24, 2013, 05:10:30 PM Too bad I'm not closer, I'd have that hammered out in no time!The diagrams posted on TF are good, I used those to wire a 3G into my TR7 harness on my 2.3 turbo. Quote Selected
1986 XR7 351 turbo swap.... Reply #154 – November 26, 2013, 08:51:41 PM Yeah...that last post on turboford should do the trick. Hopefully Saturday. Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #155 – December 19, 2013, 06:43:37 PM It's going to be a warm weekend here. Gonna get some garage time? Quote Selected
1986 XR7 351 turbo swap.... Reply #156 – December 22, 2013, 09:12:15 AM Perhaps....the car is home now...but too much snow so its stuck outside.Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #157 – April 23, 2014, 07:36:14 PM Well the worst Michigan winter in 100 years if u believe people (definately on temp not snow fall)I opened my cougar hood to figure out the few things i need to do....got the list. So should be some big engine sounds soon.Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #158 – April 23, 2014, 09:22:57 PM This has been great to follow, especially since I have an on3 kit, 76mm turbo 351w with a c4 in my 88 bird under the stock hood. My car is a beater though, yours is looking great. Quote Selected
1986 XR7 351 turbo swap.... Reply #159 – April 29, 2014, 07:04:32 PM Thanks.....it's a neat car....we will see how the big 351 does soon.Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #160 – April 30, 2014, 08:59:31 PM Cant wait for your review. its on my list of things to do. Good luck Quote Selected
1986 XR7 351 turbo swap.... Reply #161 – May 01, 2014, 06:18:56 PM My review....LOL...Lots of work, $$, and now the engine bay is so full...The little 2.3 was cake.It will all be good...Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #162 – May 11, 2014, 09:03:02 AM I have a full weekend with family stuff, yard stuff, so no car stuff....but I did setup carputer 2.0 Win7 32bit 2gb ram 32 SSD dual core atom...so not warp drive but it does have 2 usb ports...and I have usb to serial to control the pimp and wideband...pretty neat.http://www.crystalcomputersupport.com/carstuff/carputer2.jpgWell at least some progress in 2014....LOLTravis Quote Selected
1986 XR7 351 turbo swap.... Reply #163 – June 16, 2014, 09:04:25 AM Small progress....I primed the fuel system and tested the PiMP aftermarket EEC4 system last night....also wash the old car...Travis Quote Selected
1986 XR7 351 turbo swap.... Reply #164 – July 04, 2014, 08:59:33 AM Another minor update....ordered 3.27 gears, complete bearing/seal kit for 8.8" rear, and posi rebuild kit....the m-4700c ... got to start going through my 1988 XR7 3.08 gear rear end...Travis Quote Selected
Topic: 1986 XR7 351 turbo swap.... (Read 79420 times)
previous topic - next topic
