Skip to main content ↑ ↓
Topic: GT-40 tubular intake...PICS !!!... (Read 1064 times) previous topic - next topic

GT-40 tubular intake...PICS !!!...

I have a GT-40 upper and lower intake. The lower has the ACT provision freshly drilled and tapped. The upper has been opened to 75mm and also comes with a BBK 75mm t-body spacer (you can still use a 75,70,or 65mm t-body on it).

The finned areas of the intake were removed and replaced with smooth aluminum. I am going to polish the "tank" area,and the T-Body . The center tube area will be painted either Ford Blue,or a metallic graphite or silver.The lower will probably be left natural aluminum. I'll be asking $425.00 shipped for all 3 pieces.



'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #1 –
I wish they had made one of those for the ugly v6 intake. I would buy it.
--SteveN 👍
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L

GT-40 tubular intake...PICS !!!...

Reply #2 –
I'll stick with your old one... but it would be cool to have
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

GT-40 tubular intake...PICS !!!...

Reply #3 –
Jerry,with your welding skills,I really don't see why you couldn't fab one up easily.

Steve, just swap in a 5.0 and you're on your way.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #4 –
I would have to see one up close first.... but your right, I could make one I guess...I really wanted the attachment to weld aluminum for my welder
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

GT-40 tubular intake...PICS !!!...

Reply #5 –
Quote from: vinnietbird;350102
Jerry,with your welding skills,I really don't see why you couldn't fab one up easily.


WOAH....:brick: Now, there's an idea for my 6'er... hmmmmm...... Now you've got me thinking again:evilgrin:
--SteveN 👍
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
 

GT-40 tubular intake...PICS !!!...

Reply #6 –
You goin' back to the Explorer Gt-40, or something new?

I have had a hard on for this intake since I saw it in your car..... good luck!
FOXLESS!!

1994 Lincoln Mark VIII

GT-40 tubular intake...PICS !!!...

Reply #7 –
Quote from: 20thanniver-ls;350109
You goin' back to the Explorer Gt-40, or something new?

I have had a hard on for this intake since I saw it in your car..... good luck!

I'm keeping my GT-40 that I have now. Jerry has my Explorer piece,and I have an extra GT-40 and Explorer (uppers and lowers) in the garage waiting for some love before I send them to a new home eventually.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #8 –
Quote from: daminc;350104
I would have to see one up close first.... but your right, I could make one I guess...I really wanted the attachment to weld aluminum for my welder

I have the GT40 now,as you know,Jerry,and as much as I like it,it doesn't make any difference in power,and to be quite honest, I think the Explorer intakes I've had (the "FPV one you have,and my other "Cobra" version) had more character. I'm keeping the GT40 for a while, but I wouldn't be surprised if I sold it and went back to an Explorer intake with a polish and some other visual mod done to it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #9 –
I could make one with big tubes that stick out of the hood...lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

GT-40 tubular intake...PICS !!!...

Reply #10 –
Quote from: daminc;350131
I could make one with big tubes that stick out of the hood...lol

Just because one CAN do something doesn't necessarily mean one SHOULD do something. LOL.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #11 –
Quote from: vinnietbird;350134
Just because one CAN do something doesn't necessarily mean one SHOULD do something. LOL.LOL.

I know, but it's a funny thought, isn't it
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

GT-40 tubular intake...PICS !!!...

Reply #12 –
Throttle body intake:giggle:
--SteveN 👍
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L

GT-40 tubular intake...PICS !!!...

Reply #13 –
Pics coming Saturday.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

GT-40 tubular intake...PICS !!!...

Reply #14 –
Pics are posted...
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..