5.0 cover car bites the dust

Topic: 5.0 cover car bites the dust (Read 1158 times) previous topic - next topic

5.0 cover car bites the dust

October 27, 2009, 01:00:49 PM

The Hallett/CarFX project Mustang — featured on the December '09 cover of 5.0 Mustang — dramatically flipped over a tire wall at Hallet Circuit in Oklahoma this weekend, ending up on its roof.

The accident apparently happened at turn six of the track, and the results, as you can see from the gallery above, couldn't be any more dramatic. After ramping the tire wall, the car planted nose-first into the ground and flipped forward, coming to a halt on its roof. You can see in the post-pancake-flipping images that the bolt-in roll cage simply punched through the floor, completely failing in its duty.

Incredibly, neither the driver nor passenger were injured in the accident. Reminds us why we prefer weld-in cages with big thick contact pads.

http://jalopnik.com/5390934/mustang-...yline=true&s=i

5.0 cover car bites the dust

Reply #1 – October 27, 2009, 01:04:27 PM

I'd say the driver and passenger are lucky. That bastid is FLAT lol.

5.0 cover car bites the dust

Reply #2 – October 27, 2009, 01:07:47 PM

I bet that scared the out of those fellas. :poke:

5.0 cover car bites the dust

Reply #3 – October 27, 2009, 02:09:04 PM

I was going to say, all that work and money and they didnt do a cage? But the fact that is punched though the floor is ridiculous!

All that money....

5.0 cover car bites the dust

Reply #4 – October 27, 2009, 03:42:10 PM

shiznit will buff out.

5.0 cover car bites the dust

Reply #5 – October 27, 2009, 08:44:09 PM

note to all, weld in cage, GOOD, bolt in cage, BAD!!!

5.0 cover car bites the dust

Reply #6 – October 27, 2009, 09:56:21 PM

I would expect a LOT more from a cage.They are very lucky to be alive.I wonder what that car WAS worth.I bet their cages get a lot better now.

5.0 cover car bites the dust

Reply #7 – October 28, 2009, 01:36:05 AM

Quote from: vinnietbird;296657

I bet their cages get a lot better now.

I think they'd do for a few driving lessons too :hick:

5.0 cover car bites the dust

Reply #8 – October 28, 2009, 10:11:41 AM

Why would some one use a bolt in cage? I don't even road race and I know it's a stupid idea, kinda like bolt on subframe connectors.

5.0 cover car bites the dust

Reply #9 – October 28, 2009, 10:12:20 AM

One of the comments in the article was right on the money. "You can have the best cage in the world, but it won't do you any good if it's bolted to graham crackers." Like others have said, I guarantee their future cages will be much better.

5.0 cover car bites the dust

Reply #10 – October 28, 2009, 08:59:11 PM

Wow, a bolt in cage. Maybe they should reconsider bolt in cages legal in competition.

5.0 cover car bites the dust

Reply #11 – October 29, 2009, 09:30:31 AM

I think that the cage was good...
But the floor ...
They should have reinforced the floor ...

5.0 cover car bites the dust

Reply #12 – October 29, 2009, 04:56:19 PM

It could be the best cage in the world, but if it's not tied into anything underneath it does no good.