Skip to main content ↑ ↓
Topic: Finished Sons Turbo TC!! Pics!! (Read 5019 times) previous topic - next topic

Finished Sons Turbo TC!! Pics!!

Reply #15 –
Love the Bullitt rims.  I like the 17" rims but would have gone with thicker side walls to show more meat. 

You definitely executed the low profile well though.

Great work.

Finished Sons Turbo TC!! Pics!!

Reply #16 –
Quote from: thunderjet302;278336
Looks great:D I'm guessing you used the base/LX header panel to increase airflow to the front mount intercooler?


Yep, and they are plentiful in the jy's. In the summer his car will run cooler in the LA traffic as well.
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Finished Sons Turbo TC!! Pics!!

Reply #18 –
Quote from: 88turbo;278387
are you using offset/offset lers?


Ugh! Was that the issue!! The lers were ATR straight through style. Dang it! You guys should have warned me. If thats the case, my bad. I have to say even after the tweaking the exhaust looks kicka$$
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Finished Sons Turbo TC!! Pics!!

Reply #19 –
Quote from: RDOG;278383
They sure are every bit 10.5". I shaved 3/16 additional from the backspacing to bring them in more. I also had to remove that secondary shock. My wheels didnt move outward with the 5 lug swap because I didnt use lincoln axels. I took my stock axels and modded them to 5 lug so that I would not loose my ebrake.


You drilled new holes and put studs in?

Finished Sons Turbo TC!! Pics!!

Reply #21 –
Quote from: jcassity;278398
You drilled new holes and put studs in?


yep. I sealed them and redrilled them. Then I just took stock rotors and had them drilled to 5 lug too(didnt seal those though, just redrilled them)

Heres a pic..

http://i158.photobucket.com/albums/t97/biggrgivens/parts%204%20sale/5lugTCreara.jpg
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Finished Sons Turbo TC!! Pics!!

Reply #22 –
Quote from: xjeffs;278384
Love the Bullitt rims.  I like the 17" rims but would have gone with thicker side walls to show more meat. 

You definitely executed the low profile well though.

Great work.


Yeh, actually they came with 315's but my son always has people in the back, so I swapped them for 275's. No rub and I wont have the kid calling me for tires. LOL!! I would have realy made the 10.5's stand out more (But thats for my car)
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!
 

Finished Sons Turbo TC!! Pics!!

Reply #23 –
Weird, they look like they have the same lip front and rear. That's why i asked about the offset. My 10.5s have a 2" lip.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

Finished Sons Turbo TC!! Pics!!

Reply #24 –
Quote from: shame302;278626
Weird, they look like they have the same lip front and rear. That's why i asked about the offset. My 10.5s have a 2" lip.


I know, and that's probably why I got them for $125. LOL!! Next time I'm gonna get the ones with the deep dish style. His look cool when you are up on it from the back, but not really from the side. His entire project now. Once it left the driveway, the investments are his now. Time to work on my baby. Wait till I'm done with her.
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Finished Sons Turbo TC!! Pics!!

Reply #25 –
I want that car pretty bad.  Nice build.  Mine doesn't even have an engine in it. :(  Very Darth Vader.

Finished Sons Turbo TC!! Pics!!

Reply #26 –
nice car, but why is the back, passenger side of the hood sticking up in the air?

Finished Sons Turbo TC!! Pics!!

Reply #27 –
Where do you buy these clear corner lights?
Also would it be possible to get a video of it at idle? I want to hear this cam!
1971 Camaro Blown 640ci
1988 T-Top Mustang
1980 Mustang coupe
1988 Thunderbird TurboCoupe
And a purple mini van! :burnout:

Previous Thunderbirds:
1988 Sport

Finished Sons Turbo TC!! Pics!!

Reply #28 –
Quote from: Live Fast;278847
Where do you buy these clear corner lights?
Also would it be possible to get a video of it at idle? I want to hear this cam!


i remember on the old board, people were tinkering with the corner lense,  you gotta take it apart to get the yellow out..........
i think thats what i remember.  its been several years though but it has been done. 
user name "thesoldan" , he coug seems to have them white as well. 
how do i know,, ?
the banner up right now for me shows his / her car

Finished Sons Turbo TC!! Pics!!

Reply #29 –
hmm...I may try it out on a mustang corner light before i mess up the ones in my bird.
1971 Camaro Blown 640ci
1988 T-Top Mustang
1980 Mustang coupe
1988 Thunderbird TurboCoupe
And a purple mini van! :burnout:

Previous Thunderbirds:
1988 Sport