4.6

Topic: 4.6 (Read 3823 times) previous topic - next topic

4.6

April 23, 2009, 12:27:12 AM

Has anybody on this website put an sn-95 4.6 motor in their car?

I know a lot of people here put 5.0's in their cars, but I know a place with a shiznitton of 4.6's...rather cheap, I think for the entire motor assembly, 600-ish bucks.

worth considering? Would this require incredibly extensive work? Or would it be more cost efficient to find an old 5.0and throw that in there?

4.6

Reply #1 – April 23, 2009, 12:35:40 AM

I would say that a 5.0 would be simpler because the car with them in the 80s.

4.6

Reply #2 – April 23, 2009, 01:05:37 AM

Are we talking a SOHC 4.6? If so screw it put in a 5.0. The SOHC 4.6 is a turd. A 5.0 HO is a much better engine for making power. Now if we're talking a DOHC 4.6 then yeah go for it

4.6

Reply #3 – April 23, 2009, 01:12:19 AM

Not all of those Sohc 4.6 are turds. Need to find the 97 and newer version. much better intake and heads.

Stuckman

4.6

Reply #4 – April 23, 2009, 01:19:15 AM

Even with the PI 4.6 SOHC it's still hard to get much more than 300 hp without some kind of forced induction. A 5.0 will do 300+ hp NA easy. With all that's involved with a 4.6 swap it would be better to spend the money on a DOHC engine

4.6

Reply #5 – April 23, 2009, 01:23:58 AM

Quote from: thunderjet302;268749

Even with the PI 4.6 SOHC it's still hard to get much more than 300 hp without some kind of forced induction. A 5.0 will do 300+ hp NA easy. With all that's involved with a 4.6 swap it would be better to spend the money on a DOHC engine

4V would be the only way I would swap a 4.6 in my car.

4.6

Reply #6 – April 23, 2009, 01:23:06 PM

What's the differeence between the SOHC and DOHC? I know that DOHC=Dual overhead cam and SOHC= single overhead cam, but how is DOHC better? Better able to handle more power?

4.6

Reply #7 – May 24, 2009, 01:11:49 AM

where would a 4v 4.6 be found?

my 08 exploder is a 3v

4.6

Reply #8 – May 24, 2009, 01:15:04 AM

93-98 mark VIII's, 96-04 cobras, 03-04 mach 1's and merauders as well as aviators.

4.6

Reply #9 – May 24, 2009, 07:57:25 AM

Navigators as well but I'm pretty sure that those are a 5.4 DOHC

4.6

Reply #10 – May 24, 2009, 10:13:49 AM

Yep, they are but they can and do fit. At least they do in a SN95/new edge and even easier into a S197

4.6

Reply #11 – May 24, 2009, 10:37:53 AM

I'll stick to the old pushrod motors, much easier :D

4.6

Reply #12 – May 24, 2009, 12:45:27 PM

if i could find a Mark VIII LSC engine and a t56 6 speed on the cheap, thats what would be in my car.

i would also put an LQ4 chevy motor and a t56 in it if it were cheap also.....

4.6

Reply #13 – May 24, 2009, 01:05:17 PM

HEy RunninWild
this may seem out of subject but wich wheels u got on they really stand out

4.6

Reply #14 – May 24, 2009, 07:21:59 PM

Quote

if i could find a Mark VIII LSC engine and a t56 6 speed on the cheap, thats what would be in my car.

You can get the Mark VIII engine cheap. Don't need the LSC as the added HP came from the exhaust. Engine is the same as the non LSC cars. Its not an easy swap though. 5 speed would be cheap and easy but you can snag a T56 for a reasonable price. Picked mine up for 1300 complete with 14K miles on it.