HO cam vs F150 cam

Topic: HO cam vs F150 cam (Read 1422 times) previous topic - next topic

HO cam vs F150 cam

April 21, 2009, 08:53:43 PM

I have a 96 5.0 roller E7's and I am unsure of which cam to use to make the most torque/power I asked a few questions on the small block forum but nobody seemed to know anything. this engine will be carbed with an edelbrock performer intake and a 1406 carb with long tube hooker competition headers. ideas and opinions welcome

HO cam vs F150 cam

Reply #1 – April 21, 2009, 09:18:04 PM

That cam has the same exhaust duration as the HO cam, but 20* less intake duration...it's the same cam that's in the Explorers and their peak power is *claimed* to happen around 4200 with "P" heads.
If you're using stock E7 heads, it may fall off a little sooner than 4200.

Good luck,
Don

HO cam vs F150 cam

Reply #2 – April 21, 2009, 10:40:01 PM

the E7's are stock with the exhaust humps removed. so from what I am understanding HO>F150?

HO cam vs F150 cam

Reply #3 – April 22, 2009, 07:22:34 AM

This should help....

HO cam vs F150 cam

Reply #4 – April 22, 2009, 08:34:56 AM

Wow thanks Paul, there is alot of good information there, alot more than I expected to find lol

HO cam vs F150 cam

Reply #5 – April 22, 2009, 04:45:56 PM

If you have both cams I'd stick the HO one in

HO cam vs F150 cam

Reply #6 – April 22, 2009, 08:42:18 PM

I will have both cams by the end of the week and I am leaning more toward the HO cam. too bad I'm not putting this in my TC :( should be alright in the cougar I hope.

HO cam vs F150 cam

Reply #7 – April 23, 2009, 08:27:39 AM

Great info, too bad I dont know how to make heads or tails of it.