Show me, if you have cut a hole January 02, 2009, 04:26:36 PM in your trunk to access the fuel pump.How did you do it? How did you seal it?Pics? Quote Selected
Show me, if you have cut a hole Reply #1 – January 02, 2009, 04:30:51 PM i did it with a old vic and sealed it with silicone Quote Selected
Show me, if you have cut a hole Reply #2 – January 02, 2009, 04:40:38 PM Your tank is full, isn't it? :hick: Quote Selected
Show me, if you have cut a hole Reply #3 – January 02, 2009, 04:50:03 PM You can read about the whole ugly incident here: http://www.turboford.net/ubb/ultimatebb.php?ubb=get_topic;f=2;t=050477And yes, the tank is full of 108. I was planning on cutting it anyway, just happened ahead of schedule. Now it's time to turn it into a proper access hatch. Quote Selected
Show me, if you have cut a hole Reply #4 – January 02, 2009, 05:28:30 PM Quote from: V8Demon;249856Your tank is full, isn't it? :hick:i keep a spare Holley blue, 10' of 3/8" hose, and a 110v-12v converter for those situations. Quote Selected
Show me, if you have cut a hole Reply #5 – January 02, 2009, 07:19:54 PM I'd cut the panel from a parts car slightly larger than the hole you'll have in your trunk floor,then your panel can have some overlap to it.Hinge it,seal it,whatever. Quote Selected
Show me, if you have cut a hole Reply #6 – January 02, 2009, 07:24:46 PM Quote from: vinnietbird;249887I'd cut the panel from a parts car slightly larger than the hole you'll have in your trunk floor,then your panel can have some overlap to it.Hinge it,seal it,whatever.That's what I was going to do also, but after patching all the holes for a year, I can't bring myself to cut the only good un-rusted metal on my car. LOL Quote Selected
Show me, if you have cut a hole Reply #7 – January 04, 2009, 03:45:55 PM Quote from: t3skidooYou can read about the whole ugly incident here: http://www.turboford.net/ubb/ultimatebb.php?ubb=get_topic;f=2;t=050477Ummm... that post starts off with "Topic: EVP on '85s?", and ends with a bad hose from the pump. I was kind of expecting a thread on cutting a hole in the trunk. Quote Selected
Show me, if you have cut a hole Reply #8 – January 04, 2009, 05:07:24 PM Yup, I cut a hole to access the pump. Even with cutting the hole it was faster and easier than dropping the tank. Now that I've got the hole, it's time to properly fix it.If you were expecting an exciting tale of metallurgy, sorry to disappoint. The surgery went pretty well, didn't even cut any fuel lines. Quote Selected
Show me, if you have cut a hole Reply #9 – January 04, 2009, 10:50:29 PM you should post up pics, for when the next person decides to do the same thing. Quote Selected
Show me, if you have cut a hole Reply #10 – January 05, 2009, 12:21:20 AM Quote from: Haystack;250237you should post up picsOkay.After the cut. http://www.foxtbirdcougarforums.com/attachment.php?attachmentid=18078&stc=1&d=1231132668After zip-tying vacuum line around the edges (to keep blood off the gas tank)http://www.foxtbirdcougarforums.com/attachment.php?attachmentid=18079&stc=1&d=1231132685Original piece taped in place after the sound deadening was removedhttp://www.foxtbirdcougarforums.com/attachment.php?attachmentid=18080&stc=1&d=1231132707 Quote Selected
Show me, if you have cut a hole Reply #11 – January 05, 2009, 12:29:17 AM When I do the other bird, I won't cut so much off. The pink line is about where to stop. Below the line stays on the car. It will make the floor stronger and also make a nice place to mount a hinge. Some tabs to keep it in place, a lock to keep it closed, some insulation to keep the weather out, and you'll be set. http://www.foxtbirdcougarforums.com/attachment.php?attachmentid=18081&stc=1&d=1231132965 Quote Selected
Show me, if you have cut a hole Reply #12 – January 05, 2009, 02:54:47 PM actualy you could put that back in with some renforcement and do what you were thinking and it would be really strong. Basically cut off what you were talking then go in and build a small structure in there and hinge it and everything. Quote Selected
Show me, if you have cut a hole Reply #13 – January 05, 2009, 07:15:58 PM Cougar, that's a good idea. But I'm not a welder, so someone else is going to have to do that for me. The duct tape, even though it looks really classy, is just temporary. Quote Selected
Show me, if you have cut a hole Reply #14 – January 06, 2009, 09:10:01 AM ya know how you had the rubber tubing zipped tied on there you could use that as your seal against the weather. Ever think of using adhesives to put it together? just as good as welding when you don't have a welder. Do a search on it. Quote Selected
Topic: Show me, if you have cut a hole (Read 1872 times)
previous topic - next topic
