Skip to main content ↑ ↓
Topic: 87/88 turbo stuff needed (Read 579 times) previous topic - next topic

87/88 turbo stuff needed

Ok,,, my brother-in-law is putting an 88turbo into a pinto, he is in need of the computer, wiring harness and the vam meter. If anyone has and wants to sell please let me know.

Thanks, Joe
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

87/88 turbo stuff needed

Reply #1 –
I have a computer ready to go.It's from an '87 TC,$30.00 shipped.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

87/88 turbo stuff needed

Reply #2 –
i have a big vam
someone was supose to buy it and havnt heard anything from him so its still for sale
make an offer
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07
 

87/88 turbo stuff needed

Reply #3 –
Vinnietbird- I will let you know on the computer, he has one intown place to check

Daboss- what size meter? OEM?, aftermarket?

Thanks guys
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

87/88 turbo stuff needed

Reply #4 –
Quote from: flipnbird;221615
Vinnietbird- I will let you know on the computer, he has one intown place to check

Daboss- what size meter? OEM?, aftermarket?

Thanks guys

hey there it would help to have the processor ID code so he could pick witch one is better for his app. Then as for the VAM there are only 2 sizes when is comes to ford 2.3T a small and a large. The larger the better but you would most likely want the ECU that was made fro the Big VAM. Same goes the other way around. Also the ECU determines what size injectors you are running so. The VAM, ECU and injectors need to match. Then Most any ford 2.3t harness should work but depending on the ECU it might need to be repinned or wires added. So I say tell your friend to head over to http://www.turboford.net/cgi-bin/ultimatebb.cgi?&r=actu
That is the place to be. He can get all the info he needs there. Most are doing it the lowest buck possible some do it high dollar.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

87/88 turbo stuff needed

Reply #5 –
I'll post it after work.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..