Skip to main content ↑ ↓
Topic: I need a 1/4 window..... (Read 1242 times) previous topic - next topic

I need a 1/4 window.....

I need a driver side 1/4 window for an '87/'88 Sport or TC.All black trim.I need the rubber trim to be smooth with no cracks or dry rot.If you can help,let me know.I didn't want to spend the huge dollars for a new one.I suppose at this point,and the luck I haven't had finding this window,I may be forced to buy the new one.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #1 –
is there anything you could do to smooth the roughness out? I got this windows I pulled for you but the surface is a little rough.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

I need a 1/4 window.....

Reply #2 –
Nope,it's done.Once the rubber starts cracking,it also starts shrinking.That can't be fixed.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #3 –
bump-a-roo
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #4 –
ill keep my eye's peeled... ill see when i make my next round to the wrecking yards around here. they seem to be lackin in 87-88 cougars and tbirds... not that i look for those... im more of an 83-86 person lol

I need a 1/4 window.....

Reply #5 –
I don't care about window tint,stickers,whatever,as long as the rubber trim is smooth to the touch and it looks nearly new.Thanks a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #6 –
no problem

I need a 1/4 window.....

Reply #7 –
Bump !!!!!!!!!!!!!!!!!!!!!!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #8 –
Hey Vinnie-are new ones still available?  What are they going for?

I need a 1/4 window.....

Reply #9 –
It appears I'm going to have to get a new one.They run around $175.00 each plus tax.After I get mine (the numbers left are tiny),I'll let everyone know where I got it.I know I'm actually being greedy,but it took me a LONG time to find them,and I want to make sure I get one.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #10 –
go look at the 20 dollars or less best offer sale thread and someones got on for slae for like $5 or $10.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

I need a 1/4 window.....

Reply #11 –
Nope,it's dry rotted.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I need a 1/4 window.....

Reply #12 –
What do you have to do to get one out?
I can steal a few.kidding of course,theres a few here.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

I need a 1/4 window.....

Reply #13 –
If you can find one with smooth rubber..........Oh man,that would be awesome !!!! Just pull the interior panel out that covers the window area,remove the nuts that hold the window in (from the inside),and gently push the window out.Done.If you can find one with smooth rubber and no dry rot or cracks,grab it and send me an amount to send to you.THANKS!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

I need a 1/4 window.....

Reply #14 –
You no vinnie,you may have rust free but we got ,everything else.sunday I will look.Goin to the yard.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +