Skip to main content ↑ ↓
Topic: The "Stinkin Lincoln" is being striped!!! (Read 41700 times) previous topic - next topic

The "Stinkin Lincoln" is being striped!!!

Reply #210 –
I have a line on a fender, but a passenger fender. Idc really, I dont want anything pretty, this car isnt in good enough shape to really care that much. Its just gonna be good enough to pass inspection and look acceptable. I have fixed so much on this car, I cant give up now! I've grown waaay to attached!
Those wheels are BBS wheels.
And I was told that thunderbird front clip and doors fit my car! I Might be trying that out with my parts turbo coupe....
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #211 –
I think the doors are slightly different.Doesn't the Mark have different body lines upper and lower?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The "Stinkin Lincoln" is being striped!!!

Reply #212 –
I thought the body lines were diff. because of the chrome around the wheels, and the turn signals are longer i think
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

The "Stinkin Lincoln" is being striped!!!

Reply #213 –
tbird door glass, and dew wipes fit mark 7 doors so I dont think so.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #214 –
well i peeled all the seam sealer from the trunk area, where the water drains, its rotted all the way across.... So I bought this liquid metal stuff, some rust killer, and silicone. Not the best way to do it, but its what I got to do...
I wire brushed in there, sprayed down the rust killer, and started with the liquid metal stuff, Its sorta like pre mixed JB weld. Its working out nicely. Gonna do that and throw some silicone on the inside to make sure I stop the leaks. Not proud of hacking it, but Its all I can afford to do, and it wont be to bad. its sandable and paintable so I can make it look decent. Car had to be moved back into the yard, so I need to get it back in the air and apart, and I have to check my front rotors. I guess I didnt tighten them enough, ones loose. I need to get a manual and get torque specs... Brake lines are about bent and ready to install, but need to get fittings out of distribution block.

Looking for a D block on the lincoln site so might get lucky.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #215 –
It really doesn't matter how you fix the rust, as long as you seal it from the air.If you want a  good sealing product to stop the rust use zero-rust. it's about $18 a quart. you could do the entire underneath of your car with 1 quart. and its brushable or you can use a small roller. many diff. colors too.

if you need some cheap fix tips let me know.
I know your not going for show quality, so there are a lot of things you can do to repair your rust and get by with a decent looking car.

so where's the pics. lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

The "Stinkin Lincoln" is being striped!!!

Reply #216 –
ill take some pics tomorrow!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #217 –
hood is different on the mark if I recall... I think it hangs over alittle bit. You would prolly have to change out the front clip fenders and doors to make it even pretend work.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

The "Stinkin Lincoln" is being striped!!!

Reply #218 –
I looked into it more and was told that swaping the entire front clip, hood included, and it supposedly fits. I wanna see pics....
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #219 –
I still say that the lines of the T-Bird fenders and/or doors won't line up to the Mark VII lines.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The "Stinkin Lincoln" is being striped!!!

Reply #220 –
who knows!
Trunk will no longer leak!! 3 tubes of liquid metal, some silicone, and some undercoating and its done!! Looks decent, but at least its not riddled with holes
pics later.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #221 –
Aren't the lincolns a bit wider too?
I thought the dashs were to wide to use in cats and birds.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

The "Stinkin Lincoln" is being striped!!!

Reply #222 –
Not a clue. Just going on what I was told by several members on fordvschevy.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #223 –

Thats what I started with today... Pretty  bad, thats cleaned up, and rust proofed


And the finished product after replacing all the seam sealer with liquid metal, applying a thin coat of silicone, and then spraying on some undercoat!
Its not the greatest but it will do quite nicely!!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07
 

The "Stinkin Lincoln" is being striped!!!

Reply #224 –
I think that looks pretty good and it will def get the job done... No water in the trunk is a good thing.
:ford::oldcougar::mercury: