New Headliner Installed
Reply #11 –
Eric,the molded headliner is easy.Just peel off the old material,get a brush to gently se off the old foam that's left on,then spray on the adhesive on it,spray adhesive on the headliner material (the back,of course),wait a minute,GENTLY and CAREFULLY apply the new headliner material to the board being VERY CAREFUL to prevent wrinkles,roll it over the edges just a little and trim off the excess material.Let it dry,re-install it.No worries.Again,it cost me $35.00 to have it done at a shop,which,is cheaper than buying the material and adhesive and doing it yourself.I did one before.It wasn't hard,but I spent almost twice as much doing it myself.Hope that helps you out.