help Reply #16 – March 29, 2007, 11:27:09 PM just get a rear axle assy from sn-95 stang and bolt it up Quote Selected
help Reply #17 – March 29, 2007, 11:28:20 PM Quote from: Chuck W;137216*BUZZ*!!!!!!Try again.86-88 Tbird/Cougar 7.5's will not work with the Mustang axles....You can swap the entire rear axle assy from the SN-95 Mustang if you like and have the same width axle to axle , but the axles will not swap into the wider 87 7.5 housing.That is news to me. Bearing areas don't match up? Quote Selected
help Reply #19 – March 29, 2007, 11:35:08 PM Quote from: JeremyB;137219That is news to me. Bearing areas don't match up?IIRC that's one of the issues covered in the threads that touched on this whole issue. The 3/4" may not be an problem, but most likely it is. The 86-88 Tbird 7.5 housing are wider....and thus the bearings are in a different spot than the others.willywags....there is a search feature on this board.....it works.... Quote Selected
help Reply #20 – March 29, 2007, 11:37:12 PM I thought that the axle housing of the sn95 was the same width as the 86-88. Infact i slid my sn95 axles into my old 88 housing and they seem to fit fine...ERER I ARE CORNFUSED.. Quote Selected
help Reply #21 – March 29, 2007, 11:38:09 PM shiznit, I JUST REALISED that your right in my backyard. Sorry, /end spaz attack Quote Selected
help Reply #23 – March 29, 2007, 11:41:26 PM Quote from: 84 Fila;137229shiznit, I JUST REALISED that your right in my backyard. Sorry, /end spaz attackNow I understand.... Quote Selected
help Reply #24 – March 29, 2007, 11:41:28 PM Nope....the 86-88 Tbird 7.5 housings are 3/4" wider per side than the Mustang and early Tbird 7.5's and the 8.8's.The axles will slide in.... Quote Selected
help Reply #27 – March 29, 2007, 11:44:14 PM Quote from: Chuck W;137234Nope....the 86-88 Tbird 7.5 housings are 3/4" wider per side than the Mustang and early Tbird 7.5's and the 8.8's.The axles will slide in....So the fox stang and sn95 housing is the same? Quote Selected
help Reply #28 – March 29, 2007, 11:47:19 PM LOOK HEREYes, the 79-98 Mustang 7.5 and 8.8, the 83-85Tbird 7.5 and 87-88TC 8.8 housings are all the same width...The 86-88 Tbird/Cougar 7.5's are wider.... Quote Selected
help Reply #29 – March 29, 2007, 11:49:00 PM so dropping a ho 302 in and and tranny th axle will need changed right Quote Selected
Topic: help (Read 4176 times)
previous topic - next topic
