2.3T cam

Topic: 2.3T cam (Read 2396 times) previous topic - next topic

Reply #15 – March 31, 2007, 10:52:22 PM

Quote from: turbopete;137414

1.49to 1.51" is the stock exhaust valve head size. Oversized exhaust are usally around 1.59" . You might get 1.94" intakes to fit, not sure, they are usually 1.89" OS. It willl be hard to unshroud either size in an NA head, especially 1.94s. Good luck with it, sounds like a neat project.

Ive been working a little on the chambers,Im supposed to drop it off this next week to have the new seats cut.The chamber pic looks wierd because i used 2 exhaust valves so i could unshrould the intake valve side.Pic quality isnt the best camera phone

2.3T cam

Reply #16 – April 01, 2007, 04:15:55 AM

maybe couple quick phone calls to esslinger or racer walsh could help you pick out a camshaft for that set up. i am pretty sure they can help you with that. thats just my .02 cents but if u want a 3rd cent just build it and give it to me :-p

2.3T cam

Reply #17 – April 01, 2007, 10:01:25 AM

http://msvorinich.itgo.com/oldindex/oldindex.html

This is the guy !! .. pre-warning, you get into this ... i'm only gonna read one more page mood, before you know it. your boss is on the phone wondering what excuse your going to use this time..for being 2 hours late

:hick:

2.3T cam

Reply #18 – April 01, 2007, 10:17:15 AM

I used to email Mike back and forth.. Its a shame to not see any new updates.

2.3T cam

Reply #19 – April 01, 2007, 12:40:11 PM

Quote from: CougarSE;137615

I used to email Mike back and forth.. Its a shame to not see any new updates.

He's a jackass anyways.

2.3T cam

Reply #20 – April 02, 2007, 11:52:07 PM

I decided on the .500 lift lunati it will be here tommorow around lunch