Skip to main content ↑ ↓
Topic: The Fila Project... Wondering why Fila was banned? Read the last few pages (Read 120309 times) previous topic - next topic

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #135 –
meh, aint berry pretty... but its finally getting somewhere
 

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #136 –
Not bad for $800 huh? Tomorow I'll probaly clean her up, give ehr a bath and clean under hood. Make her pretty for all ya guys

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #137 –
i love how your valve covers look all nice and shiny. my valve covers are all oxidized or something. they look dirty but its not dirt lol. one of em the front 2 inches or so of it look new in a patch thats like 4 inches in diameter, and then the rest is the rough, sandpaper-like grayness.
 
ill repaint em...someday...:grinno:
 
congrats on the progress!
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #138 –
Thanks. But think if I actually pollished the V/C's. They would look nice and pretty. I'll probaly do that, scrub all the grime out from under the nood and try to clean my wheels tomorow

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #139 –
Quote from: 84 Fila;122320
and try to clean my wheels tomorow


mine need cleaned too... :beatyoass:  lol

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #140 –
And:shakeass:

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #141 –
Hey,those plug wires look very familiar.LOL.I didn't use chrome covers.I almost did,then,I decided to polish my factory Mustang aluminum covers,Nice.Keep up the good work.No matter how small of a repair you make,it's still one step forward on the car.Moving forward is a good thing.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #142 –
Oh yeah Vin, thanks for those and my newest present:grinno: As the rest of you may know, I'm confuzzeled on my dizzy suitation so I had Vinnie send me a new one. EVEYTHING I need to bolt it in. Also very soon on my to do list

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #143 –
2 barrel carb / moddified CFI coming up soon/next. Unless I brake something else in the meantime

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #144 –
Let me be the first to admit, this was a dumb idea, but it's done. I went ahead and swapped the 4 barrel intake onto the car, with the adapter.

Now the EGR spacer is totaly off the car. The timing is totaly guessed, and now the throttle/kickdown bracket ( when bolted to the 4 barrel intake) holda the carb 3/4-WOT just sitting there. WTF? I know I jumped off the deep end, and will eventualy put a carb on, but this stuck me as the perfict time to do it as it's cold, snowy, and I will not drive the car in it. Anyone have anything to say / anything to throw at me?

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #145 –
Well,you're already knee deep into it.Get the carb on and get it going.You've gone this far,might as well finish what you started.You can spend money on a temporary fix,or spend money for the actual "fix".My 2 cents.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #146 –
Well, i figure:
1. It's winter, so no driving
2. A temp fix till I get the cash
3. I can work the hours to get a carb
4. a carb can be found, but it might not be "THE RIGHT CARB" for a while, more of one to run it. probaly a 2 barrel at first, then a nice edelbrock maybe? Now that i started this cluster fornicate, I have to finish it

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #147 –
Consider how much money you spend for temporary fixes,and consider how much of that could've went towards the carb you wanted,and the carb to AOD TV cable you'll need.There are reasonable caerbs all over E-Bay.How about a carb from an '85 Mustang GT.Those Holleys were prety good.Then there are the Demons and etc. as well.Good luck.If I can help,you know I will.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #148 –
Some of my freinds run edelbrocks. I've heard good things, and I wana give one a shot. 570-600 maybe. It all comes down to money, motovation, and time. Right now, I have the motovation, but I work the next 6 days, and get paid saturday. It will go peice by peice, but for now, I can only play with what I have.

The Fila Project... Wondering why Fila was banned? Read the last few pages

Reply #149 –
Ok, well not it's "poping/backfiring". I'm sure the dizzy was put in wrong, so I'm checking that now. Anyone have any idea's of what else I can do now, as teh car will be down / off the road till spring for repairs/mods?