Skip to main content ↑ ↓
Topic: Jobless! Buy my stuff! (Read 2089 times) previous topic - next topic

Jobless! Buy my stuff!

Hey everybody,
Now that I'm unemployed and all, time to offer up everything for sale (not enough storage and need to pay mortgage!) If you need ANY part for a 83-88 T-Bird or Cougar, PLEASE contact me. I'm basically living off of this until I find a job. SO here's a very SHORT list of what I have (10,400 Lbs of loose parts...) (prices do not include shipping)

EATC, $15
TC gauge cluster, $20
TC dash face, $30
near mint lower red cloth back seat, $15
a-pillar trim, $15/pair
kick panels, $15/pair
rear sail panels, $15/pair
rear lower panels (cloth only), $15/pair
door panels (cloth only) bar, $35/pair
armrests w/pads, $40/pair
map pockets, $50/pair
rubber trim, $10-$25 piece
plastic beltline trim, $20-35 piece
center console (85-88 or FULL-length style) $65 complete w/armrest and latch!
.040 over 2.3T block, decked, tanked, cleaned, sonic-checked, and race-prepped, $100 (I have $500 worth of machine work into just the block!)
2.3T crancks, $50 piece
2.3T rods, $50/set
used heads, complete with cam, $150 each
E6, $35 each
TC Hood with scoops/ductwork, $85
87/88 T-Bird decklids, $45
83-84 Cougar header panel w/grill, $75
83-86 headlight surrounds, $50/pair
flat hood, $30
83-86 Cougar decklids, $45
83 Cougar taillights, $150/pair
87/88 TC taillights, $150/pair
87/88 base header with lights/grill, $100
87/88 doors, rust-free, $150/pair or $75 each
83-86 doors, rust-free, $150/pair or $75 each

I have the following parts cars currently in inventory:

1983 Cougar GS 3.8 red/red cloth, hit both sides rear, LOW miles, rust free
1984 Cougar LS 3.8 white/tan cloth, hid BAD right rear
1987 T-Bird LX 3.8 white/tan cloth, hid VERY BAD right front
1988 TC 2.3/T5 blue/blue cloth, side-swiped by 18-wheeler
1987 TC 2.3/auto silver/raven cloth, rusted shock towers
1988 TC 2.3/auto gunmetal/raven cloth, hit (minor) just about everywhere, surface rust, blown trans, hole cut in roof
1988 Merkur XR4Ti, Black/grey, bent frame from off-roading

I also have complete, running cars
1988 Lincoln LSC tan/tan 5.0HO, $1000
1989 Mustang Coupe red/red 2.3/auto, $500 (GREAT 2.3T drag car project!)

PLEASE call, PM, post, or e-mail if you need ANYTHING for your car. I could really use the business right now! I'm home full-time, 7-days a week!

Jobless! Buy my stuff!

Reply #1 –
Hey Mike, I'm looking for a set of upper and lower rear control arms...I don't care about the condition of the bushings because I will be replacing with poly bushings anyway...just looking for decent condition arms...not crushed/bent/etc.  LMK what you would want for a set and we'll see what we can arrange.

Thanks,
Don
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

Jobless! Buy my stuff!

Reply #2 –
Don,
I have a VERY nice set, off of a 110K mile 87 TC automatic car! I'd take $85 for the 4 plus shipping. They are PERFECT.

Jobless! Buy my stuff!

Reply #3 –
I need the trim around the shifter for a stick Turbo coupe.  I broke both the tabs on the one I have now.
1988 Thunderbird
5.0 HO, t5, TC rear, TC brakes, etc. - Gone

Jobless! Buy my stuff!

Reply #4 –
Ooooh, that I don't have. You should try fixing yours.

Jobless! Buy my stuff!

Reply #5 –
Michael, still interested in that silver bumper cover, any chance that I can get a pic of it without a bra?  :tg:

Jobless! Buy my stuff!

Reply #6 –
...forgot to ask. That surface rust on that trunklid I got from you earlier this year has been doing nothing but bothering me. Also interested in the condition of the lid on that other grey car. Not a single spot of rust on my whole car, but that other one was somewhat nasty on the lip.
1988 Thunderbird Sport

Jobless! Buy my stuff!

Reply #8 –
Seek, I have lots of trunks. Why didn't you wire-wheel it off?

Graham, I have a Gunmetal bumper cover that is way nice except 4 of the 5 spoiler doo-dads broke, I usually glue a piece of aluminum in there.

Jobless! Buy my stuff!

Reply #9 –
I just always think all rust will come back to screw everything up. Don't know differences between surface rust and worse though.
1988 Thunderbird Sport
 

Jobless! Buy my stuff!

Reply #10 –
Quote
center console (85-88 or FULL-length style) $65 complete w/armrest and latch!

holly shiznit.. You MUST be broke to lower the price ... $35
One 88

Jobless! Buy my stuff!

Reply #11 –
$35 was for just the console, $65 is for the console, box, perfect lid with working latch, seat control plate, ashtray, and shifter surround. I normally get $40 for the lid alone. BTW, Everybody already notices that you *try* to rag on me every thread, so you can go ahead and stop now.

Jobless! Buy my stuff!

Reply #12 –
Ha!  One last thing.. I'd have to dig it up but you had listed a console for 100 bucks..  thats what I ment by lowered the price $35
One 88

Jobless! Buy my stuff!

Reply #13 –
Quote from: Aerobird Motorsports
Graham, I have a Gunmetal bumper cover that is way nice except 4 of the 5 spoiler doo-dads broke, I usually glue a piece of aluminum in there.


any pics?  I bought one from a guy and it was totally trashed...  not worth using.:yuck:  I'd like to see it if you dont mind.

Jobless! Buy my stuff!

Reply #14 –
Quote from: Aerobird Motorsports
Graham, I have a Gunmetal bumper cover that is way nice except 4 of the 5 spoiler doo-dads broke, I usually glue a piece of aluminum in there.


any pics?  I bought one from a guy and it was totally trashed...  not worth using.:yuck:  I'd like to see it if you dont mind.