Skip to main content
Topic: looking to get rid of 66 ply. sport fury for cougar (Read 806 times) previous topic - next topic

looking to get rid of 66 ply. sport fury for cougar

I know don't yell at me it is not even a ford, looking to upgrade:D .  car is in very good condition other then poor repaint 95,000 mi.318 big block (poly) 2bbl looking to get  $5,000 but would trade for cougar of = value any year ok would prefer 83 to 88 though. If I can figure out how to post pics I will.

looking to get rid of 66 ply. sport fury for cougar

Reply #1
1. There is a forum for non fox.
 
2. Trying to pull a fast one on us Cougar guys? A 318 is NOT a big block. Distibutor is in the back! Only blocks with the dist in front are a BIG block. Unless your talking about Old ~426 Hemis as theres was in the rear.. And with 95k have you replaced the timing chain? They have nilon teeth! Its all over the dodge forums!
One 88

looking to get rid of 66 ply. sport fury for cougar

Reply #2
I am not trying to pull a fast one on anyone, I don,t know anything about mopar. Picked up car a couple of years ago from a friend as long as I have known the car only things changed were alt. carb. ,and batt. term. Motor does take up a lot of room under the hood, everyone around here says it is a big block, I realy do not know or care this is the only non Ford product I own just want to get another cougar.

looking to get rid of 66 ply. sport fury for cougar

Reply #3
Poly blocks are large... and often incorrectly called a big block.
One 88

looking to get rid of 66 ply. sport fury for cougar

Reply #4
Pics?
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

looking to get rid of 66 ply. sport fury for cougar

Reply #5
can't figure out how to post pics, keep getting file to large message. I don't know much about comp. only know enough to log on go where I need to and get off, any ideas on how to get pics on here?

looking to get rid of 66 ply. sport fury for cougar

Reply #6
Quote from: CougarSE
Unless your talking about Old ~426 Hemis as theres was in the rear..


The 426 Hemi's have the distributor in the front, on an angle just like the B and RB blocks...it's the older hemi's that had the distributor in the rear.
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

looking to get rid of 66 ply. sport fury for cougar

Reply #7
No offence guys but really do not care about motor in this car  just looking to get pics up so I can get another Cougar if you can help with that that would be great.

looking to get rid of 66 ply. sport fury for cougar

Reply #8
Quote from: cougardoc
No offence guys but really do not care about motor in this car  just looking to get pics up so I can get another Cougar if you can help with that that would be great.


While YOU man not give a  about that great piece of iconic mopar history...I'm certain that potential buyers/mopar nuts want to know as much about the car as possible.
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

looking to get rid of 66 ply. sport fury for cougar

Reply #9
Quote from: cougardoc
can't figure out how to post pics, keep getting file to large message. I don't know much about comp. only know enough to log on go where I need to and get off, any ideas on how to get pics on here?



your going to have to eather open your pictures in another program and resize them, or what maybe easier for you sence your not to computer literate is go retake the pictures on the lowest possible setting of your camera.

if you want, you could also try loading your pictures onto something like immage shack.com, or photobucket.com and putting the link, or little code they give you in your post to show or link us the pictures.

looking to get rid of 66 ply. sport fury for cougar

Reply #10
Quote from: Sick88Tbird
The 426 Hemi's have the distributor in the front, on an angle just like the B and RB blocks...it's the older hemi's that had the distributor in the rear.

Notice I put the little "~" sign in front of the 426.. Too me that means "under 426ci".
One 88

looking to get rid of 66 ply. sport fury for cougar

Reply #11
I do give a dammmm about this car it is a great car and hate to get rid of it but prefer a car I already know about, and as far as buyers they would already know about or can find out on other sites instead of taking up space here.
Thanks for the pic. info. will try today and should have pics soon.