Skip to main content
Topic: Control arm bushings for the rear impossible to find? (Read 2355 times) previous topic - next topic

Control arm bushings for the rear impossible to find?

I've called every parts store and they all dont have a listing for the lower controll arm bushinigs! 
 
Is the bushing that goes into the lower controll arm at the axle the same as any of the top bushings?  That bushing has completely fallen apart.
One 88

Control arm bushings for the rear impossible to find?

Reply #1
yes, i've kinda been looking around for some too, with little success...mine are all but gone, and the rear squeaks on bumps...
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Control arm bushings for the rear impossible to find?

Reply #2
Will one from a 88 TC? My freind is gutting one and he might have more around the garage. I can ask if you want

Control arm bushings for the rear impossible to find?

Reply #3
Someone back me up if I am right, but I think you can use Mustang lower control arm bushings.  You just have to know if you have round or oval bushings.
Matt :tg:

Control arm bushings for the rear impossible to find?

Reply #4
Quote from: slowfoxbird
Someone back me up if I am right, but I think you can use Mustang lower control arm bushings. You just have to know if you have round or oval bushings.

Makes sense to me. :)

Have you guys tried http://www.rockauto.com?
2005 Subaru WRX STi|daily driver

Control arm bushings for the rear impossible to find?

Reply #5
The mustang ones "should" work. Take in consideration that the only real difference between the control arms are the lengths.
Temporarily Foxless? Ride the Bull...

Control arm bushings for the rear impossible to find?

Reply #6
The bushings in the rear lower arms are the same as the Mustangs..
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon-  '81 Granada GL 2dr

Control arm bushings for the rear impossible to find?

Reply #7
Duh
 
Duh and
 
Ahum Duh
 
 
I know the bushings are the same.... but where in the hell do I get them???????
 
Second question........  is the bushing thats in the rear of the lower controll arm the same as either of the two uppers?
One 88

Control arm bushings for the rear impossible to find?

Reply #8
Dunno where you get them...I never wasted my time with replacing the py rubber bushings.  If you can find some pre '98 Mustang arms, you can get the bushings out of them.  99+ used 14mm instead of the 12mm hardware of the earlier cars...

No the upper bushings are different than that rear lower bushing...
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon-  '81 Granada GL 2dr

Control arm bushings for the rear impossible to find?

Reply #9
Make a call to Energy Suspension, you can replace py rubber with urethane.
Matt :tg:

Control arm bushings for the rear impossible to find?

Reply #10
Summit Racing has a complete upper and lower kit from Prothane that is actually listed for our cars. Summit part #PTP-6-301-BL, kinda pricey though at $56.95.
Temporarily Foxless? Ride the Bull...

Control arm bushings for the rear impossible to find?

Reply #11
That's not pricey....the ES kit is closer to $75-80 normally.

As has been mentioned before, do not replace all 4 locations with poly.  At the very least leave the rubber bushings on the axle ears.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon-  '81 Granada GL 2dr

Control arm bushings for the rear impossible to find?

Reply #12
-dunno if the aftermarket supplies them, but nat availiable seperate from ford.  only serviced in arm assy....
-'87 turbo coupe with only 740 ORIGINAL miles.... :dunce:
-'86 turbo coupe, 5sp. Cali Car.......:cool:

Control arm bushings for the rear impossible to find?

Reply #13
Called my buddy at the ford dealer... they can't even get the controll arms.
One 88

Control arm bushings for the rear impossible to find?

Reply #14
how about some moog part numbers upper control arm kit k8637 lower control arm kit k8289 that is for the bushings only and you need one set per side.I know these parts are available at oreilly auto parts.  http://www.oreillyauto.com/EW3/ByKeyword.do?keyword=bushing&descriptionId=948  Also I know energy suspension has them I put there total car kit in my 84 turbo coupe.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird