normal looking cam wear? June 06, 2006, 09:46:17 AM just wondering since its a roller, I figured there wouldnt be any wear on it..Have a chance to get it cheap but dont want to buy a worn out from something failing camshaft. btw its a ecam Quote Selected
normal looking cam wear? Reply #1 – June 06, 2006, 03:29:11 PM The picture is a little small for me to tell 100%, but I have a few questions....How many miles are on it?What kind of rocker arms and ratio were the rocker arms used?Is it local to you where you could get a micrometer on it?If not will the current owner do so if you ask? Quote Selected
normal looking cam wear? Reply #2 – June 06, 2006, 03:55:37 PM 1. less then 20k2. no clue3. no local4. doubtfullol, but for cheap I think Ill snag it and have a shop check it out before it goes in. Quote Selected
normal looking cam wear? Reply #3 – June 06, 2006, 09:19:15 PM anywhere where you have 2 metals contacting for an extended period of time you will get wear weather its a flat tappet or a roller. the oil helps keep the roller from damaging the cam lobe but it will still wear over time. if its cheap enough get it and mic it:D Quote Selected
normal looking cam wear? Reply #4 – June 07, 2006, 12:13:25 PM well..the stock cam in my car has gone 200k so I think under 20k will be fine, anyway Ill still have a place check it out most likely. Quote Selected
Topic: normal looking cam wear? (Read 1029 times)
previous topic - next topic
