86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Topic: 86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27) (Read 2494 times) previous topic - next topic

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

May 09, 2006, 11:00:39 PM

Folks-

I have one set of my motor mounts for the 5.0 Tbirds/Cougars unspoken for in this batch. They will be going to the platers this week, so depending on the turnaround from my poly supplier, they should be shipping in 3-4 weeks.

They are being offered with a choice of isolators. Either the std 70A durometer or a slightly softer 60A durometer.

Pricing is $135/set for the 70's and $140 for the 60's. I will ordering my poly based on the orders, so I need to wrap these up soon and get things ordered.

There will be more, just don't have a timeframe as of yet.

Chuck
cwarren@indy.net

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #1 – May 09, 2006, 11:25:40 PM

Will those fit an AMC 401? :D:D:D

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #2 – May 10, 2006, 09:14:09 AM

Quote from: Aerobird Motorsports

Will those fit an AMC 401? :D:D:D

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #3 – May 12, 2006, 09:34:13 PM

Well I went ahead and ordered the isolators for this set with the rest since no one spoke up.

This set will have the 70A isolators.

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #4 – May 12, 2006, 09:39:56 PM

GIMME!

(translation: I'll take them, if they are still available. I've sent you a PM) :D

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #5 – May 12, 2006, 10:01:27 PM

Looks like they have found a home.

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #6 – December 15, 2006, 02:53:20 AM

Do you have anymore 5.0 mounts still avalible?

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #7 – December 15, 2006, 07:17:58 AM

put me on the list too

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #8 – December 15, 2006, 08:55:49 AM

If you guys are interested send me an email. I'll be doing more.

cwarren@indy.net

Chuck

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #9 – December 15, 2006, 11:51:33 AM

Hmmm... have you had anyone install these on a 351w?

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #10 – December 15, 2006, 12:02:45 PM

Quote from: Ether947;118470

Hmmm... have you had anyone install these on a 351w?

They'll fit....

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #11 – December 15, 2006, 12:45:45 PM

Well my concern was with the engine height. I'm not too familiar with 86-88 mounts but it looks like there is a way to modify them to "adjust" the height by removing some of the isolator?

But either way I want a set.

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #12 – December 15, 2006, 01:42:53 PM

If you want a set email me

That is the only way I keep track of interest.

I could always adjust the height a touch when I build them but I wouldn't go any lower than an extra 1/2" w/o knowing exactly how much clearance you have over the K-member. I wouldn't take the height out of the isolator itself.

86-88 Tbird 5.0 motor mounts (1 set avail for shipping 12/27)

Reply #13 – December 19, 2006, 06:20:22 PM

Ok, so....

I have a set of mounts available in the batch I will be shipping w/in the next week. They have the stiffer isolators.

The total would be $143/shipped.

Anyone interested? Email me.

Chuck
cwarren@indy.net