Skip to main content
Topic: Would my car have some sort of rev/speed limiter (Read 2537 times) previous topic - next topic

Would my car have some sort of rev/speed limiter

I blame this all on the fact that my speedo reads about 20 mph to fast. 
 
Some times if I really give the cougar hell and take it to red line.  She will just fall flat, like the fuel got cut off.  But if I shift to the next gear and keep on hammerin it it will just keep going, like its not the speed.  But could it be the revs?  Its weird and I rarely take the cougar up to those high rpms but I was just wondering if maybe my car had some kinda limiter.
One 88

Would my car have some sort of rev/speed limiter

Reply #1
Valve float.
It's Gumby's fault.

Would my car have some sort of rev/speed limiter

Reply #2
the only fox i rember having a limit at all was the mark's speed limiter. im going to have to go with shawn and say valve float also.

Would my car have some sort of rev/speed limiter

Reply #3
Your speed limiter is the 3.8

Would my car have some sort of rev/speed limiter

Reply #4
Quote
Quote from: stuntmannick
Your speed limiter is the 3.8

:mad: 
 
Quote from: Shawn
Valve float.
 

I've never experianced valve float.  But I thought it didn't just happen, I thought it to be more like a missfire.
One 88

Would my car have some sort of rev/speed limiter

Reply #5
Does the 3.8L have the same 6,250rpm fuel cut-off as our 5.0's?  Although I really can't see trying to scream a 3.8L to any more than 5500...lol.
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

Would my car have some sort of rev/speed limiter

Reply #6
Quote from: Sick88Tbird
Does the 3.8L have the same 6,250rpm fuel cut-off as our 5.0's? Although I really can't see trying to scream a 3.8L to any more than 5500...lol.

 
You don't know me very well..:evilgrin:
One 88

Would my car have some sort of rev/speed limiter

Reply #7
Quote from: CougarSE
You don't know me very well..:evilgrin:


You're absolutely right...lol....will that little motor chirp the tires going into second? :evilgrin:
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

Would my car have some sort of rev/speed limiter

Reply #8
Quote from: Sick88Tbird
You're absolutely right...lol....will that little motor chirp the tires going into second? :evilgrin:

:mad: Now that I have the 245/50's and a trac-loc it wont. With the old 235/55's It would. Man If I still had 14's on the car I could roast them through third.
 
But now I've got too much realestate to turn back there.
One 88

Would my car have some sort of rev/speed limiter

Reply #9
valve float will feel like the motor was just put on idle, most likely what it is if I was a guessing man, which i am.

Would my car have some sort of rev/speed limiter

Reply #10
Quote from: Funky Cricket
valve float will feel like the motor was just put on idle, most likely what it is if I was a guessing man, which i am.

 thats what it feals like.  Hmm, need me some stiffer valve springs.......
One 88

Would my car have some sort of rev/speed limiter

Reply #11
Quote from: Sick88Tbird
Does the 3.8L have the same 6,250rpm fuel cut-off as our 5.0's?  Although I really can't see trying to scream a 3.8L to any more than 5500...lol.

At 6250 rpm, the 3.8 would throw pistons into orbit.  ;)

Would my car have some sort of rev/speed limiter

Reply #12
Quote from: JeremyB
At 6250 rpm, the 3.8 would throw pistons into orbit. ;)

I don't know how high I've actually had it, but I know its been into the red zone on that turbo coupe tach.  Wich is working well now for some reason.
One 88

 

Would my car have some sort of rev/speed limiter

Reply #13
is yours a 88? supercoupe stuff wount work would it? like heads, i know theirs also that v6 performance website that sells 6cyl stuff. maybe look their for some stiffer springs. it would be pretty sweet if you did the super coupe swap like spaz had done.

Would my car have some sort of rev/speed limiter

Reply #14
dont bother with valve springs. Replace them with a 5.0.
It's Gumby's fault.