installed mustang tubular a arms...

Topic: installed mustang tubular a arms... (Read 4759 times) previous topic - next topic

installed mustang tubular a arms...

Reply #15 – March 06, 2006, 07:20:54 PM

lol, guess i wasnt thinkin on that one! chuck do u have any of those mounts left??

installed mustang tubular a arms...

Reply #16 – March 06, 2006, 07:24:04 PM

No, but I will be making more. If you want me to add you to the notification list send me an email.

cwarren@indy.net

installed mustang tubular a arms...

Reply #17 – March 25, 2006, 11:49:40 PM

hey! i'm looking for a set of control arms for the front of my 86 turbo coupe.

chuck, i highly doubt that the k-member between the 87-88 turbo coupe and the other models are different. ford likes to use the same parts or cross reference them alot, so i don't think they'd like to add cost to a good profit that they where making on the birds. hell, look at the svo mustang, left over parts different wheels.

installed mustang tubular a arms...

Reply #18 – March 26, 2006, 07:43:20 PM

well, i've got an 88 TC k-member sitting on the floor in the garage, so if any one wants measurements, just ask and i'll whip out the trusty tape

installed mustang tubular a arms...

Reply #19 – March 26, 2006, 07:47:29 PM

Quote from: motormenace

hey! i'm looking for a set of control arms for the front of my 86 turbo coupe.

chuck, i highly doubt that the k-member between the 87-88 turbo coupe and the other models are different. ford likes to use the same parts or cross reference them alot, so i don't think they'd like to add cost to a good profit that they where making on the birds. hell, look at the svo mustang, left over parts different wheels.

I doubt it too.... but until someone measures one of each I won't be convinced one way or the other :D

Break out that tape measure Pressure Cooked.....

installed mustang tubular a arms...

Reply #20 – March 26, 2006, 08:46:51 PM

ok, i went and measured both the TC k and a tubular fox stang k as well. Interesting results to say the least. The TC k is as follows: forward a-arm mount points =23" apart center of bolt to center of bolt. rearward mount points=30 1/2 "
apart. Stang k as follows: forward mount points 23 3/4" apart. rearward mount points 32" Now conventional wisdom agrees with rear points: 3/4" per side, but the front is odd. I even double checked the measurements and still only came up with a total of 3/4" difference for both sides. i dunno

installed mustang tubular a arms...

Reply #21 – March 26, 2006, 09:05:22 PM

Pressure Cooked, do you have the measurements of a V6 K member, to compare to the TC k?
I'm curious if they'er different.
I'd measure mine, but my tape is at work, only thing I didn't bring homw with me friday night.

installed mustang tubular a arms...

Reply #22 – March 26, 2006, 09:19:31 PM

sorry, all i have is the above two k members.

installed mustang tubular a arms...

Reply #23 – March 26, 2006, 09:22:36 PM

ahhh, no biggie, I'll bring my tape homw with me tomorrow night, and measure a V6 k member, post the stats here, unless someone else does before I get to it. Not that it's that big of a deal, but since the other measurements are in here...

i hope i'm in the right place

Reply #24 – March 27, 2006, 12:23:22 AM

so many areas talking about the tubular suspension i figured this was the newest..... i have a 83 cougar w/ 5.0 and want the tubular k's and arms.... are they a direct fit? some say yes because of the year, some say i need spacers..... is there a difinitive answer for my (the wifes) car?

any info will help before i spend a buttload of money without getting everything i need

installed mustang tubular a arms...

Reply #25 – March 27, 2006, 02:18:18 PM

i would say fox stang tubular components is a "yes" on a 83 for sure. even if you need spacers it's really no big deal; they actually give you a bit more hood clearance because they drop the motor a little (the spacers, not the k-member itself). i would highly recommend going to coilovers as well for height adjustability and the fact most aftermarket tubular arms have no provision for the factory spring setup. hope this helps some.

sure helps :)

Reply #26 – March 27, 2006, 04:38:46 PM

but i thought the factory suspension WAS a coil-over.... i could be wrong

installed mustang tubular a arms...

Reply #27 – March 27, 2006, 04:49:02 PM

no it is not.

installed mustang tubular a arms...

Reply #28 – March 28, 2006, 02:39:26 PM

i see..... duh........ i guess this is the first car i've had without front wheel drive, so i'm used to having a regular strut and not a modified one.... my bad

installed mustang tubular a arms...

Reply #29 – March 28, 2006, 07:55:01 PM

actually, we have the "modified" macpherson strut system, modified meaning you can take the strut out, w/o removing the spring...