poly urathane

Topic: poly urathane (Read 1553 times) previous topic - next topic

poly urathane

December 27, 2005, 06:04:29 PM

so i hate too ask because i should know better but wheres the best place too buy all the bushings i need. id prefer prothane over energy. i dont need any control arm bushings. i need the front bushings and tbird length endlinks (tcoupe bar), front and rear spring isolaters, and anything else i forgot...my head is killing me right now... (let me know...lol.) thanks for your time...john

poly urathane

Reply #1 – December 27, 2005, 06:36:04 PM

You could try Latemodel Restoration Supply. I've been sourcing them for alot of parts
Anyway they have Prothane kits for sale. Here's the website:
http://www.50resto.com

poly urathane

Reply #2 – December 27, 2005, 10:07:51 PM

i just bought some es swaybar bushings at the local parts store... =/ i am immediately replacing them with a set that mm sells. i don't know what i was thinking.

i thought about giving these guys a try. http://www.p-s-t.com/

poly urathane

Reply #3 – December 27, 2005, 10:57:44 PM

does prothane make the right length and size endlinks for tbirds?

poly urathane

Reply #4 – December 27, 2005, 11:36:57 PM

Quote from: shame302

does prothane make the right length and size endlinks for tbirds?

Yes, I believe Maximum Motorsports carries them, and Summit Racing can order them.

poly urathane

Reply #5 – December 28, 2005, 01:30:27 AM

Check 5.0 resto for the polyurethane spring isolators, I believe I got mine from there because they had the best price of anyone.

Also, I got my swaybar bushings & endlinks from MM, but just be aware that the endlinks MM sells for "stock height" Thunderbirds are too short, or they were for my car at least. I had to go to the parts store to get some that were a little bit longer.

poly urathane

Reply #6 – December 28, 2005, 01:51:46 AM

yep...stupid me. for some reason i didnt think you could order right from them. im sure i paid a little more than i needed too but at least its done..thanks guys...