These are for the Carbed motor right? December 27, 2005, 12:50:42 PM I bought them off E-bay for the '85 Cougar, but I was thinking about throwing them on the t-bird if they would clear the upper intake. I haerd somewhere that you can use them if you have a phenolic spacer. Quote Selected
These are for the Carbed motor right? Reply #1 – December 27, 2005, 01:21:50 PM they look like efi covers to me. Quote Selected
These are for the Carbed motor right? Reply #2 – December 27, 2005, 05:57:36 PM Nope they're for carb'd engines. You could probibly use them with a spacer but you would have to figure out a how to route the pcv air intake line or use a breather on the passenger side cover. I don't know if the breather would hit the throttle cable bracket though. Other side should be fine but your oil fill hole is going to be under the upper intake :D . Quote Selected
These are for the Carbed motor right? Reply #3 – December 28, 2005, 09:21:47 AM I had a set they are carbed and will not work with aftermarket roller rockers................Learned the hard way Quote Selected
Topic: These are for the Carbed motor right? (Read 1044 times)
previous topic - next topic
