Skip to main content ↑ ↓
Topic: Got some Headers. (Read 1415 times) previous topic - next topic

Got some Headers.

Headman Headers. There is one thing that makes me mad about them though. The brackets to bolt them up to an X Pipe have 3 holes, where every other company has 2. So, I wanted to buy a BBK X Pipe, but now I will have to buy a Headman X Pipe. No big deal I guess. One good thing about Georgia is no car inspections! No Cats for me! :hick:
2013 Focus (Daily)
1968 Cougar XR7
1987 Turbo Coupe
5 Speed, Stock IHI, Aeromotive 340LPH, Stinger 3in DP w/Magnaflow 3in Race Series ler, Hallman Boost Controller, Corbeau Fixed Back Racing Seats, Rebuilt 35# Injectors, Kirban AFPR, Stinger's Front Mount Piping w/Big NPR Front Mount IC, 3/8 E-85 Fuel Lines, SPEC Stage 3+ Clutch, Explorer 4.0 Dual Core Radiator, Optima Red Top Battery
1988 Turbo Coupe (RIP)
1984 Cougar (RIP) :cougarsmily:
1986 Cougar XR7 5 Speed.  (sold)

Got some Headers.

Reply #1 –
3 inches is alittle bit big, how big are the primaries? and what kinda mods do you have?
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Got some Headers.

Reply #2 –
Who said anything about 3"?  Primaries are most likely 1 5/8".  I have flowtech full length headers and couldn't be happier(with the power increase-they fit like shiznit).
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

Got some Headers.

Reply #3 –
Quote from: Sick88Tbird
Who said anything about 3"?  Primaries are most likely 1 5/8".  I have flowtech full length headers and couldn't be happier(with the power increase-they fit like shiznit).


probly a 3" collector




my flowtechs fit just fine:D
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

Got some Headers.

Reply #4 –
No, not 3" look at them and you will see what I mean.

Brand:   Hedman Hedders
Product Line:   Hedman Street Hedders
Header Material:   Steel
Header Finish:   Painted
Header Style:   Shorty
Primary Tube Diameter (in):   1 1/2
Collector Diameter (in):   2 1/2
Equal Length:   No
Primary Tube Gauge:   16-gauge
Collector Attachment:   Ball and socket
Cylinder Head Port Shape:   Oval
 Style:   Standard
 Thickness (in):   1/4
Bolts/Studs Included:   Yes
Gaskets Included:   Yes
Reducers Included:   Yes
Y-Pipe Included:   No
Quantity:   Sold as a pair.

2013 Focus (Daily)
1968 Cougar XR7
1987 Turbo Coupe
5 Speed, Stock IHI, Aeromotive 340LPH, Stinger 3in DP w/Magnaflow 3in Race Series ler, Hallman Boost Controller, Corbeau Fixed Back Racing Seats, Rebuilt 35# Injectors, Kirban AFPR, Stinger's Front Mount Piping w/Big NPR Front Mount IC, 3/8 E-85 Fuel Lines, SPEC Stage 3+ Clutch, Explorer 4.0 Dual Core Radiator, Optima Red Top Battery
1988 Turbo Coupe (RIP)
1984 Cougar (RIP) :cougarsmily:
1986 Cougar XR7 5 Speed.  (sold)
 

Got some Headers.

Reply #5 –
Does Flowtech make a shorty H-pipe with the standard 3-bolt reducers? I thought they did, since they make long tube Mustang headers with 3-bolt collectors on them.

Garrett H.
'94 F250 XLT- 4x4, 5 speed, 7.3 IDI Turbo Diesel, 4" intake, 4" exhaust, 5" turnout stacks, manual hubs, etc.
'87 Thunderbird Turbo Coupe
Engine, wheels, tires, etc!
Exhaust sound clip
Another clip

Got some Headers.

Reply #6 –
Quote from: Carl
The brackets to bolt them up to an X Pipe have 3 holes,

whoops, guess I was alittle bit tired,sorry:hick:
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Got some Headers.

Reply #7 –
Quote from: Red_LX
Does Flowtech make a shorty H-pipe with the standard 3-bolt reducers? I thought they did, since they make long tube Mustang headers with 3-bolt collectors on them.


Oh, I will have to look into that. I just know that most have 2. I thought headman made their headers 3 so people would have to buy their x pipe. I could always just weld them together, but nah.
2013 Focus (Daily)
1968 Cougar XR7
1987 Turbo Coupe
5 Speed, Stock IHI, Aeromotive 340LPH, Stinger 3in DP w/Magnaflow 3in Race Series ler, Hallman Boost Controller, Corbeau Fixed Back Racing Seats, Rebuilt 35# Injectors, Kirban AFPR, Stinger's Front Mount Piping w/Big NPR Front Mount IC, 3/8 E-85 Fuel Lines, SPEC Stage 3+ Clutch, Explorer 4.0 Dual Core Radiator, Optima Red Top Battery
1988 Turbo Coupe (RIP)
1984 Cougar (RIP) :cougarsmily:
1986 Cougar XR7 5 Speed.  (sold)