Rocker Panels Exchangeabe?

Topic: Rocker Panels Exchangeabe? (Read 1335 times) previous topic - next topic

Rocker Panels Exchangeabe?

October 29, 2005, 04:43:11 PM

Mythos has some very bad rocker panels. KATie(my dead cat ) on the other hand, the Rockers are in OK condition.

Can they be cut out and replaced without causing loss of integrity to the car ?

Rocker Panels Exchangeabe?

Reply #1 – October 30, 2005, 04:16:15 PM

(BUMP)

Anyone ?

Rocker Panels Exchangeabe?

Reply #2 – October 30, 2005, 07:01:27 PM

I'm not sure you'd be able to cut them out without destroying them. You might try a sheet metal shop - most can make rocker panels up for not much money.

Rocker Panels Exchangeabe?

Reply #3 – October 30, 2005, 08:55:38 PM

ok thanks
There is a couple in the area, I'll ask around.

Rocker Panels Exchangeabe?

Reply #4 – October 31, 2005, 01:21:08 AM

are they rusty or just damaged?

replacing the rocker panels is a involved job and requires alot of cutting and welding.

Rocker Panels Exchangeabe?

Reply #5 – October 31, 2005, 07:55:05 PM

Rusted isn't a good word. A proper one would be rotted, at the point just aft of the front tire has a whole bigger then my fist. :(

Rocker Panels Exchangeabe?

Reply #6 – October 31, 2005, 08:05:56 PM

Quote from: LSX

Rusted isn't a good word. A proper one would be rotted, at the point just aft of the front tire has a whole bigger then my fist. :(

ahh, got ya. I would and add some subframe connectors to help strenthen it. the as long as you done one side at a time i wouldnt see a problem exchanging them. just time consuming. would probly be better if you could to patch the hole-s with fabricated sheet metal patches?