Skip to main content ↑ ↓
Topic: lakewood 70/30 or 90/10 fit 88 tbird? (Read 1863 times) previous topic - next topic

lakewood 70/30 or 90/10 fit 88 tbird?

like the title says

i bought some mustang rear shocks, and found out they were too short. i just wanted to know if this is the case for the front struts.

btw- im talking about the 79-93 struts

or is it better to use the sn95's?
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

Re: lakewood 70/30 or 90/10 fit 88 tbird?

Reply #1 –
yes the fronts will work
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

Re: lakewood 70/30 or 90/10 fit 88 tbird?

Reply #2 –
Short answer, NO.  Long answer, YES, BUT, you will have to run mustang gt/lx or turbo coupe front brakes...this is because of the difference in thicknesses of the spindles.  The 3.8L and 5.0L t-birds as well as 4-cyl 'stangs all use the same front brakes and the spindles are too wide at the strut mounting point when compared to the turbo coupe or 'stang gt/lx spindles.  IF you decided to swap out to the larger style brakes, PM me, I just did the upgrade a few months ago and could walk you through step by step.

Good luck,
Don
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads
 

Re: lakewood 70/30 or 90/10 fit 88 tbird?

Reply #3 –
Quote from: Sick88Tbird
Short answer, NO.  Long answer, YES, BUT, you will have to run mustang gt/lx or turbo coupe front brakes...this is because of the difference in thicknesses of the spindles.  The 3.8L and 5.0L t-birds as well as 4-cyl 'stangs all use the same front brakes and the spindles are too wide at the strut mounting point when compared to the turbo coupe or 'stang gt/lx spindles.  IF you decided to swap out to the larger style brakes, PM me, I just did the upgrade a few months ago and could walk you through step by step.

Good luck,
Don



lakewoods come with a set of shims for the narrower 5.0/3.8 spindles
or they used to  :hick:
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

Re: lakewood 70/30 or 90/10 fit 88 tbird?

Reply #4 –
Mustang shocks can be made to fit with a simple modification to the mounting brackets. Here's a thread on the subject:
 
http://www.foxtbirdcougarforums.com/showthread.php?t=2617
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Re: lakewood 70/30 or 90/10 fit 88 tbird?

Reply #5 –
Quote from: SLEEPER T-BIRD 87
lakewoods come with a set of shims for the narrower 5.0/3.8 spindles
or they used to  :hick:


I see...I was unaware of that.  :bowdown:
lol
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads