Skip to main content ↑ ↓
Topic: F/S: CSI Thottle Bracket and Lokar Throttle Cable - USED (Read 1287 times) previous topic - next topic

F/S: CSI Thottle Bracket and Lokar Throttle Cable - USED

I have a CSI (P/N 630R) and a Lokar throttle cable (P/N TC-1000HT) for sale that were on my '83 T-Bird when it had a 306 in it with a Holley 4150 carb, 1" nitrous plate, and an Edelbrock Victor Jr. intake.  I switched over to a 351W and due to the taller deck height the throttle cable is no longer long enough even with the nitrous plate removed.  I switched over to a fogger system which screwed up the old spring return setup that was mounted under the CSI throttle bracket (NOS solenoid got in the way) so I needed a throttle bracket that allowed for a top mount front spring return set up.  Anyhow here is the picture of the throttle cable, throttle bracket, and parts bag which has the pivot ball that attaches to the carb, the carb fitting which attaches to the cable and the pivot ball, and the allen wrench for the set screw on the carb fitting.  The price is $50 firm plus shipping.



Thanks,

Darren

83 351W TKO'd T-Bird on the bottle


93 331 Mustang Coupe - 368 rwhp

F/S: CSI Thottle Bracket and Lokar Throttle Cable - USED

Reply #1 –
TTT.

Darren

83 351W TKO'd T-Bird on the bottle


93 331 Mustang Coupe - 368 rwhp