Skip to main content ↑ ↓
Topic: Brake mods (Read 2003 times) previous topic - next topic

Brake mods

Doing a full brake mod on a 69 Chevelle and thought you guys would like to see how i do it. First remove all the stock junk including all valves and lines. Then fab up with copper ferrous lines . Mount a valve and go from there.





Here is the Vette master installed in the Chevelle with a new booster and my trademark spiraled lines. Note the valve has easy access for adjustments. In truth i have never see many cars that duplicate my style in line instillation. But some say it is my trade mark and look for it at shows. Once they see that they assume we did the car. just saying people E Mail me all the time on this. Normally people say hay RENZO saw another car you guys did this weekend. The brake system gave it away. Then they ask me to see the tool that made the spirals. I laugh and tell them the tool is top secret. Then they offer to pay me to make them one. Seriously i make them by hand. So now i tell people the secret tool is always hidden in the shop.  Sounds good anyway and just thought you guys would get a laugh at it. have a great day .



I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Brake mods

Reply #1 –
Looks nice.  I am jealous, I have always been intimidated to try and do brake lines and flaring etc.. 

Looks like your wrapping it around a tube of some sort and bending/shaping it.
Mike

Brake mods

Reply #2 –
It is easy to do with the new Copper Ferrous line it is a piece of cake. We used to use stainless but to hard to work with and it leaks. more often than not. Next time try and make lines and buy a good flaring tool. It really is not that difficult. have a great day guys.
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Brake mods

Reply #3 –
Them lines are great to work with. It's all I use for replacements,and they seem to be holding up to the salt stuff here.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Brake mods

Reply #4 –
Well, you've inspired me to get my butt in gear and complete my 5 lug swap with new brake lines.  I'll get a thread started soon.
T-Birds can't fly.  Ask how I know...
 

Brake mods

Reply #5 –
got them in my car..... easy to flare too
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Brake mods

Reply #6 –
great idea on the lines,, I may start doing this,, I should buy me a spool of that line and have it on hand with fittings and such.
gotta do the wifes Ghia and eventually the 20th

Brake mods

Reply #7 –
The VW uses ISO BUBBLE flares. Just saying.
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Brake mods

Reply #8 –
bubble flair the same as "double" flair,, if so I have dies for that.  The dies make the line kinda "roundy" looking on the end?

Brake mods

Reply #9 –
Bubble flairs are different than double flairs.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..