Skip to main content ↑ ↓
Topic: Pauly needs parts (Read 1911 times) previous topic - next topic

Pauly needs parts

....Always looking for better stuff/more stuff......

Here's what I want:

--- Dash style ashtray.  The kind that goes with the consolette.  Not the entire insert, just the ashtray itself.  Here's the kicker.  Gotta be a VIRGIN (Al Bundy reference intended).  That means never used. 

--- Explorer/Mountaineer dual visor style sunvisors.  Must have the large style mirrors.  Must be grey or black.  NO RIPS/TEARS/STAINS!  I have one TEENY tear in the driver side one I have now and it's hidden pretty well.  Looking for perfection here.

--- Interior A-pillar to roof trim panels.  Both sides.  Smoke grey.  Again.  Perfect only.  Mine are good.  Looking for a backup set just in case.

--- Full digital dash cluster.  Must be 100% functional.  The clear cover can be scuffed.  I got a bead on them so no biggie there as long as all the gauges work.

--- Front fender/hood insulator seals.  These are the pieces that go up against the cowl panel in the corners.  Mine are total .  Looking for something good. 

Thanks for looking.  Let's make a deal!
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Pauly needs parts

Reply #1 –
I MIGHT have the ashtray, but as nice as it is, I had some screws in it from when I got it some time ago. I'm going to check on it now.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Pauly needs parts

Reply #2 –
Yes and no. It has never been used, BUT, it has scuffs inside from the interior screws I had in it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Pauly needs parts

Reply #3 –
http://www.ebay.com/itm/NOS-1987-1988-FORD-THUNDERBIRD-ASHTRAY-ASSEMBLY-/350943748534?pt=Motors_Car_Truck_Parts_Accessories&hash=item51b5e0a1b6&vxp=mtr

http://www.ebay.com/itm/NOS-1985-1989-FORD-THUNDERBIRD-FACTORY-DASH-ASHTRAY-RECEPTACLE-NEW-FORD-ORIGIN-/141054750646?pt=Motors_Car_Truck_Parts_Accessories&hash=item20d784afb6&vxp=mtr

http://www.ebay.com/itm/NOS-1985-1989-THUNDERBIRD-DASH-ASH-TRAY-RECEPTACLE-/390322161693?pt=Motors_Car_Truck_Parts_Accessories&hash=item5ae103881d&vxp=mtr
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Pauly needs parts

Reply #4 –
Yeah.  Saw those.  Wish there was a "make offer" on a couple....  One of them is at $50.  Maybe a part # search.....
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Pauly needs parts

Reply #5 –
I would think that you can take a very nice one, paint it cammo green, then a nice smooth coat of clear satin and have the same thing.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Pauly needs parts

Reply #6 –
I have good A pillars in grey and red. Both sides. I'll sell the pair for $25 + shipping.X

Pauly needs parts

Reply #7 –
I may have the ash tray. I'll check tomorrow.

I have the last three items on your list. Bolted to my Thunderbird.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Pauly needs parts

Reply #8 –
I found the cluster  ;)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Pauly needs parts

Reply #9 –
is smoke grey light or dark grey? I have 2 in light grey in really good shape
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Pauly needs parts

Reply #10 –
Quote from: thunderjet302;436482
I may have the ash tray. I'll check tomorrow.

Nope I don't have it. I must have tossed it out.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Pauly needs parts

Reply #11 –
Smoke grey.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Pauly needs parts

Reply #12 –
Still looking for a new ashtray.  Unused.  Lemme know.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!
 

Pauly needs parts

Reply #13 –
OK.  Got the cluster and sun visors.  Still looking for th ash tray,  hood insulators that go by the cowl panel, a pillar trim, and the cowl panel trim that the wipers rest on.  The cleaner the better.  Thanks for looking.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Pauly needs parts

Reply #14 –
I saw an NOD hood insulator on Ebay the other day. That is the one that goes around the hinge, right?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..