Skip to main content ↑ ↓
Topic: Fuel filler neck grommet... (Read 3346 times) previous topic - next topic

Fuel filler neck grommet...

Is the Stang piece the same or do I need a different part. If somebody has a link or part number, I'd appreciate that.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel filler neck grommet...

Reply #1 –
Are you talking about the rubber at the tank where the filler neck slides in? If so I used a mustang one
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Fuel filler neck grommet...

Reply #2 –
I just put a new one in mine I ordered it from latemodelrestoration and yes it was the one for a stang
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:

Fuel filler neck grommet...

Reply #3 –
Order one for a 94-04
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Fuel filler neck grommet...

Reply #4 –
Don't remember the part number, but it was for the same as a Stang.
Mike

Fuel filler neck grommet...

Reply #5 –
I just used this one and it fit perfectly.

http://www.amazon.com/gp/product/B00BMEUUJ4/

Good Luck -

Geoff
T-Birds can't fly.  Ask how I know...

Fuel filler neck grommet...

Reply #6 –
I ordered one for the '04 Mustang. I have a bit less than half a tank of gas, so, I'll burn a bit more before I install it. LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel filler neck grommet...

Reply #7 –
Hit it with a bit of oil before installing. It'll help the filler slide better.
T-Birds can't fly.  Ask how I know...

Fuel filler neck grommet...

Reply #8 –
Thanks. I'll spray a little WD-40 on it when it gets here.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel filler neck grommet...

Reply #9 –
I got the one for the Stang as we mentioned above. It was too small. may have been the wrong part that i received. SO, I went to Autozone and they had one on the shelf. $27.00 and good to go.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel filler neck grommet...

Reply #10 –
I used a mustang one. Now I'm wondering if thats the source of the occasional gas smell
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Fuel filler neck grommet...

Reply #11 –
I'm sure mine was. Not now.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Fuel filler neck grommet...

Reply #12 –
Quote from: thewestie;433026
I used a mustang one. Now I'm wondering if thats the source of the occasional gas smell

Check your canister purge and charcoal canister lines.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Fuel filler neck grommet...

Reply #13 –
My buddy at Ford told me to use a very light coat of dish soap to get the filler neck in.  Not sure why but it has worked well over the years.  I used one for a Fox Mustang on my '83.

Darren

83 351W TKO'd T-Bird on the bottle


93 331 Mustang Coupe - 368 rwhp

Fuel filler neck grommet...

Reply #14 –
Quote from: V8Demon;433062
Check your canister purge and charcoal canister lines.
Thanks
I don't have one of those any more. I kept the line as vent.
 I was told SCCA tech wants tank vented in front car.
 I'm wondering if I'm getting vapor smell from the braider lines.
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done