Re: 89 mustang turbo swap questions Reply #15 – July 03, 2005, 06:44:27 PM http://www.jdsperformance.com/index.asp?initemuid=436&fcmd=item&inmake=alltheres a link for fuel pumps, if you dont plan on running more than 15psi, a 190lph would work just finehttp://www.saabperformanceparts.com/item107.htmturbo rebuild kit Quote Selected
Re: 89 mustang turbo swap questions Reply #16 – July 05, 2005, 01:53:57 PM so when i change my motor, to a stroker, and build the outa it to hold 25 lbs of boost, what pump am i gonna want to run ?thanks for the link on the turbo rebuild, my first turbo decide to leak outa the main housing, and my next turbo decided to leak into the exhaust housing, let's just say i didn't buy any smoke bombs this year !! Quote Selected
Re: 89 mustang turbo swap questions Reply #17 – July 05, 2005, 01:57:03 PM opp..almost for got !! can i change my compressor housing to a NON ford style ?! one with just a round hole's on it ?! i hate these s Quote Selected
Re: 89 mustang turbo swap questions Reply #18 – July 05, 2005, 03:42:38 PM grab a 225lph high pressure pump, thats whats in my carwhat do you mean by a non-ford style ? Quote Selected
Re: 89 mustang turbo swap questions Reply #19 – July 05, 2005, 10:29:35 PM the s on my ford, have the thermostat looking s for inlet and out let on the compressor side. i don't want that. i want the round ones.. !! thanks for the info on the pump ! Quote Selected
Re: 89 mustang turbo swap questions Reply #20 – July 06, 2005, 01:20:53 AM what year car is the turbo off of? Quote Selected
Re: 89 mustang turbo swap questions Reply #21 – July 06, 2005, 10:45:35 PM 1985 t-bird i think, that's what the gasket set i got was...and it's all the right ones, i didn't get that money order sent today, had to work !! boss called, and said i have to work early so i had no time...tommrow i will Quote Selected
Topic: 89 mustang turbo swap questions (Read 2740 times)
previous topic - next topic
