Trottle body and spacer January 02, 2014, 09:49:07 AM looking for a decent trottle body and spacer for a new 5.0 build i am doing.something better than stocki wont haggle, just gathering parts for this project. Quote Selected
Trottle body and spacer Reply #1 – January 02, 2014, 05:15:05 PM better then stock as in h.o.? I have a throttle body and egr spacer of an h.o. motor. Quote Selected
Trottle body and spacer Reply #2 – January 02, 2014, 05:58:40 PM well,, i think thats 55mm?need to ask about the bore diameter on that PP intake im getting. Quote Selected
Trottle body and spacer Reply #3 – January 02, 2014, 06:40:54 PM I have one from an explorer, 65mm. Quote Selected
Trottle body and spacer Reply #4 – January 02, 2014, 07:14:34 PM professional products edelbroke rip off should be 70mm. Quote Selected
Trottle body and spacer Reply #5 – January 02, 2014, 07:40:03 PM Quote from: 88turbo;426657I have one from an explorer, 65mm.Pls sell if you can.....i just noticed the explorer upper is kinda "knecked" inward but its actually 73mm just an inch up into the bore. Quote Selected
Trottle body and spacer Reply #6 – January 02, 2014, 07:44:02 PM Quote from: Haystack;426659professional products edelbroke rip off should be 70mm.yeah,,, i hear ya!,,,good part is my cash is staying in the country.even on masons build not a dime went to another countries stock exchange.been wondering whats up with the PP intake tag saying made in USA. Quote Selected
Trottle body and spacer Reply #7 – January 02, 2014, 08:09:27 PM Quote from: jcassity;426666Pls sell if you can.....i just noticed the explorer upper is kinda "knecked" inward but its actually 73mm just an inch up into the bore.are you interested? I have no need for it. Quote Selected
Trottle body and spacer Reply #8 – January 03, 2014, 08:14:34 AM yep, sure am...sad part is i tossed out a couple stock TB's,, totally forgot to save the shaft to transition it over... oh well Quote Selected
Trottle body and spacer Reply #9 – January 03, 2014, 05:32:11 PM I'm sure someone here might have one! lol Quote Selected
Trottle body and spacer Reply #10 – January 03, 2014, 05:59:55 PM I have a stock HO unit. No tps or iac. Cover the shipping and its yours Quote Selected
Trottle body and spacer Reply #11 – January 04, 2014, 11:09:23 AM Quote from: jcassity;426666Pls sell if you can.....i just noticed the explorer upper is kinda "knecked" inward but its actually 73mm just an inch up into the bore.As a FYI: the opening on the stock Explorer GT40 upper is 68mm-70mm depending on how it was finished. I've measured 4 of them and one was 68mm, two were 69mm, and one was 70mm. All of them were off 96-97 Explorers. I have the one with a 70mm opening on my Thunderbird right now as I'm running a 70mm TB. You can open them up easy but since I had 4 laying around it was easier to just use the one with the correct opening. Quote Selected
Trottle body and spacer Reply #12 – January 04, 2014, 12:39:58 PM check yours again,, i was measureing about 1'' or so up inside the bore,, not the actual end of the bore.i noticed the bore on the end where the spacer mounts kinda tapers inward a little. Quote Selected
Trottle body and spacer Reply #13 – January 04, 2014, 12:40:35 PM Quote from: jandmmustangs;426708I have a stock HO unit. No tps or iac. Cover the shipping and its yoursthank you,, send me your addy on pm and i will get you a post office money order out monday. Quote Selected
Trottle body and spacer Reply #14 – January 05, 2014, 01:13:04 PM Pm sent. Hopefully ya got it. My ucp isn't showing I sent it Quote Selected
Topic: Trottle body and spacer (Read 1126 times)
previous topic - next topic
