Skip to main content
Topic: Anyone try 4 lug minilite style wheels? (Read 4052 times) previous topic - next topic

Anyone try 4 lug minilite style wheels?

I found these Rota RB wheels and like them.  They are very light wheels, which is a bonus.  I haven't seen them on our Fox Tbird/Cougar set before.  Anyone have experience with them?  Backspacing and size (16x7 with +30mm offset) is similar to our TC snowflake wheels (16x7, +32mm offset with 4x108mm lug spacing)



link

Daniel

Anyone try 4 lug minilite style wheels?

Reply #1
and different color...

black

Anyone try 4 lug minilite style wheels?

Reply #2
I like them...just not sure about them on a TBird/Cougar.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon

Anyone try 4 lug minilite style wheels?

Reply #3
are they available in different widths? I know these are popular in the tuner crowd
Currently Birdless but never Foxless

86 Mustang GT

 

Anyone try 4 lug minilite style wheels?

Reply #4
I think widths are limited.  15x7, 16x7 and 17x7.5.  The offsets come in +30mm and +40mm for the 15 and 16s and +20mm for the 7.5.  I don't know a lot about them except that they are popular with the autox and tuner groups, and fit a lot of Ford of Europe cars (Focus, Fiesta, Cortina) and some of ours, too.

Anyone try 4 lug minilite style wheels?

Reply #5
those look like they should be on a beetle, a VW van or an old British sports car/ hatch back.
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

Anyone try 4 lug minilite style wheels?

Reply #6
European ...you mean like these? ;)




I just thought they look different and play into the racing heritage of Fords.  The pictures above were my inspiration. :cheers:

Anyone try 4 lug minilite style wheels?

Reply #7
Well, I stand corrected. I am just going to start eating my words now.... BUT
http://auskellian.com/paul/misc/350-9.jpg

 I suppose we are both right good sir.
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

Anyone try 4 lug minilite style wheels?

Reply #8
:)

You are correct, too.  I lived in Europe (France) and visited a lot throughout western Europe, and know that the british sports cars had minilites and panasports a lot.  They were/are also popular with VWs and small Italians...

I remember the triumphs and MGs well, my Father-in-law had a 73 MGT with those

Anyone try 4 lug minilite style wheels?

Reply #9
Maybe I'm talking myself out of these after looking at "Rota + quality" on google... I'll likely not be racing it, but Tbird, Rota = heavy car, cheap wheels = possible fail.  I haven't heard anything bad about the RBs but some of the other wheels may be suspect.  These aren't Panasports or Minilites. :dunno:



Anyone try 4 lug minilite style wheels?

Reply #10
That would defiantly suck

Anyone try 4 lug minilite style wheels?

Reply #11
There's a good chance that wheel broke after that car understeered into a curb. Its not like rotas just fall apart.

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.

Anyone try 4 lug minilite style wheels?

Reply #12
I know.  These are used in drift cars and see a lot of abuse, and maybe not reflective of the overall quality.

Anyone try 4 lug minilite style wheels?

Reply #13
Omg rotars just fall apart!
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

Anyone try 4 lug minilite style wheels?

Reply #14
hey those wheels are famous! watching transformers 3 I noticed something. Sams datsun.

https://www.google.com/search?q=transformers+3+datsun&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N&tab=wi&ei=5AXwUYTrFqr3iwLCnIHACg&biw=1454&bih=704&sei=5gXwUZaILcaYigLfroD4CA#facrc=_&imgdii=_&imgrc=bLxKfT3WvdenwM%3A%3B4VIJFR4DbmuZLM%3Bhttp%253A%252F%252Fwww.tfw2005.com%252Ftransformers-news%252Fattach%252F7%252F3%252F8%252F6%252F3%252FTF3ChicagoCameronPic5_1279020462.jpg%3Bhttp%253A%252F%252Fwww.tfw2005.com%252Ftransformers-news%252Ftransformers-movie-just-movie-31%252Ftransformers-3-milwaukee-filming-sam-witwicky-and-his-1972-datsun-510-170176%252F%3B640%3B474
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke: