Skip to main content ↑ ↓
Topic: My new FPV GT-40 intake plate ...... (Read 2553 times) previous topic - next topic

My new FPV GT-40 intake plate ......

This is my new intake plate for my GT-40 intake. It goes from the throttle body, across the top, and down about 80% of the driver side with the FPV badge recessed into it.





'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

My new FPV GT-40 intake plate ......

Reply #2 –
Thank you Sir.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My new FPV GT-40 intake plate ......

Reply #3 –
installed pics when you can.  Looks nice.
Mike

My new FPV GT-40 intake plate ......

Reply #4 –
I will as soon as I can. I intended to post some tonight after work, but the tiny man was here, then my wife's dog ran off and was lo0st. Now, screw working on thew car. LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My new FPV GT-40 intake plate ......

Reply #5 –
O.K., I was weak....filthy engine, but who cares? Body work starts soon. I may not use it forever, may change it to more of a factory style that I make, I'll let it sit and see if I like it. py night shot....

'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My new FPV GT-40 intake plate ......

Reply #6 –
I had to google that fpv

I gotta ask why you use that logo ?

Other than its somthing different

My new FPV GT-40 intake plate ......

Reply #7 –
i like it!! i like how you like to be different.....:hick:
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

My new FPV GT-40 intake plate ......

Reply #8 –
Quote from: STANG8U;412923
I had to google that fpv

I gotta ask why you use that logo ?

Other than its somthing different

I like something different.  I don't want it to look like 30 other cars.

I'll have the engine detailed and back in order right before painting the car. For now, no point in it. Gotta get the new blue hoses, plug wires,  and new valve covers on, new paint on the engine, and a lot more.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My new FPV GT-40 intake plate ......

Reply #9 –
You painting the engine bay when you paint the sport vinnie?

My new FPV GT-40 intake plate ......

Reply #10 –
That's cool

It's defiantly  different .... :)

My new FPV GT-40 intake plate ......

Reply #11 –
Quote from: 87thunderbirdBlackJack;412934
You painting the engine bay when you paint the sport vinnie?

 
Yeah, I'd recommend this, but I could also easily turn a paint job into a 100-200 hour ordeal. Doing it right can also get ridiculously expensive with breaking or bending trim as it comes off, reproduction stickers, etc.
1988 Thunderbird Sport

My new FPV GT-40 intake plate ......

Reply #12 –
Fully stripping down the engine bay of everything for paint is no picnic either. Still a must in my book for any nice paintjob. I'm actually doing mine on my bird right now. I'll be in about 2-300 work hours by the time I am done with just the paint/body work on the car. :)

My new FPV GT-40 intake plate ......

Reply #13 –
I'll do some work on the engine bay before I'm done. Not looking for perfection under there. It's a driver, and will get dirty. I don't want a garage queen. I expect some rock chips up front as well. Right now, I'm still collecting parts to do all this work. I have boxes piled up in the garage full of parts waiting for their turn to go on. New wheels are happening as well.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My new FPV GT-40 intake plate ......

Reply #14 –
Quote from: Big B;412973
Fully stripping down the engine bay of everything for paint is no picnic either. Still a must in my book for any nice paint job. I'll be in about 2-300 work hours by the time I am done with just the paint/body work on the car. :)
Tell me about it !! LOL I'm thinking I have close to 500 hrs and still counting with what I may do with my covers, hood, and trunk lid.

So Vinnie, what wheels are you switching to?, or is that one of those "Wait till you see it" deals :D I also like that cover!


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]