Skip to main content
Topic: Needed...8.8 pinion shaft and bolt. (Read 998 times) previous topic - next topic

Needed...8.8 pinion shaft and bolt.

Looking for an 8.8 pinion shaft and the bolt for it. Let me know what you have. Thanks.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Needed...8.8 pinion shaft and bolt.

Reply #1
The cross pin that holds the axles in ?

Needed...8.8 pinion shaft and bolt.

Reply #2
Vinnie, let me know if you've found one or not...I've got a spare from a Mustang that I'm not doing anything with. I can ship it in the morning, if you've not found one yet.
I bought the rear for the brake parts some time back, it IS an 8.8 with trak lok.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Needed...8.8 pinion shaft and bolt.

Reply #3
Do you have the screw for it as well?
If so, get it to me !!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Needed...8.8 pinion shaft and bolt.

Reply #4
Quote from: STANG8U;407565
The cross pin that holds the axles in ?

Yep, that's what I need....and the screw for it (or "bolt")
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Needed...8.8 pinion shaft and bolt.

Reply #5
I just looked I only have one for a 31 spline

But I have the 8mm bolt

Needed...8.8 pinion shaft and bolt.

Reply #6
I may need that if Beau doesn't have it.

Beau, do you have them?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Needed...8.8 pinion shaft and bolt.

Reply #7
Cool just let me know

Needed...8.8 pinion shaft and bolt.

Reply #8
Sure do Vinnie. Think a padded envelope will handle the journey? Or should I box it?
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Needed...8.8 pinion shaft and bolt.

Reply #9
watch out for padded envelopes thru USPS.. I had someone send me hardware once (4 bolts and 4 washers) and the envelop was delivered opened and empty,  I called post office they said if it gets stuck in the sorter they get dumped sometimes.
[SIGPIC][/SIGPIC]


Needed...8.8 pinion shaft and bolt.

Reply #10
That sucks

Needed...8.8 pinion shaft and bolt.

Reply #11
Small box for shipping it is lol
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Needed...8.8 pinion shaft and bolt.

Reply #12
True. I ordered new push rods, and the guy sent them in a USPS envelope and I got an envelope with a tear down the side, no push rods.

Beau, maybe a small box, or a small padded envelope in a medium sized padded envelope.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Needed...8.8 pinion shaft and bolt.

Reply #13
Yea that pin is not the lightest

Needed...8.8 pinion shaft and bolt.

Reply #14
The last I saw of the pin, it was lovingly fitted into it's very own travel container, set for a new destination in South Oklahoma, lol.

Box, foam, and all. I daresay some of that foam is on it's return journey, lol.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)