Skip to main content ↑ ↓
Topic: need cruise control cable clip (Read 1204 times) previous topic - next topic

need cruise control cable clip

need the clip that mounts to the diaphram dealio that lives inside the driver side fender.

the clip that attaches to the end of the cable.

pls let me know

scott 304 772 3411

gap mills wv 24941

need cruise control cable clip

Reply #1 –
scott, I have a module that I can pull this from, I will dig it out this weekend and take some pics for you.

need cruise control cable clip

Reply #2 –
No problem, dont need pics, im sure its the right clip anyway.
leme know how much

ph 304 772 3411 or 4082

need cruise control cable clip

Reply #3 –
Where is this clip? I have the diaphragm laying in my basp00get, I don't see a clip.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

need cruise control cable clip

Reply #4 –
It's a tiny little clip that holds the cable to the diaphragm part behind the fender.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need cruise control cable clip

Reply #5 –
Mine looks molded to it. I'll take a pic.

X
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

need cruise control cable clip

Reply #6 –
I will look on the parts car today it is a 84 model, to see if its there.

need cruise control cable clip

Reply #7 –
thanks vinnie, been busy on two cars with cooling issues

here are some pics when i fixed this same issue 4 years ago.

need cruise control cable clip

Reply #8 –
Quote from: Kitz Kat;399978
Mine looks molded to it. I'll take a pic.


those two nuts come off to reveal the cable / clip with one tiny ass snap ring

need cruise control cable clip

Reply #9 –
Scott, tomorrow I will take mine apart and get you a picture.  Do you need the clip and the snap ring? or any other parts?  Thanks

need cruise control cable clip

Reply #10 –
if thats your only back up, i wouldnt take from a good  unit, honestly i dont want to put you out man.
If you want to part with the whole assembly, thats fine to, i am starting to question my cable anyway.  the routing of it has often made me wonder if its not binding somehow.  it feels real free right now up at the throttle body so i guess the cable on mine is ok.

i can hand make one , have to dig up that thread from a few years ago, someone hand made one from a sheet metal s part from a computer power supply or something.

if its your only spare, keep it but if you wanna part with the clip, that would be great, just leme know how much. you got my number.

need cruise control cable clip

Reply #11 –
Send him both. They are easily lost when working with them. If you're pulling one, the other is right there.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need cruise control cable clip

Reply #12 –
if no one is able, i will attemp to hand make one. 
thanks,

scott

need cruise control cable clip

Reply #13 –
I have the whole thing if your still looking, I doubt my cruise will still work after I replace this engine.
I really don't need a spare.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

need cruise control cable clip

Reply #14 –
ok,
I determined i need a cruise cable.. it was broken down at the vac actuator in the fender.

if anyone has a cable,, pls let me know or call 304 772 3411

I appreciate it.