Skip to main content ↑ ↓
Topic: Looking for brackets and pullies.... (Read 1616 times) previous topic - next topic

Looking for brackets and pullies....

Reply #15 –
I'll see what I can do for you. Hopefully it wasn't raped in a week.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Looking for brackets and pullies....

Reply #16 –
Thanks Kitz. You know where to find me.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #17 –
My short list....

Timing pointer
brackets and the fasteners
pulleys
water pipes for the lower intake
throttle cable bracket
5.8 distributor with the TFI on it (or a place for the TFI if the TFI is missing)
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #18 –
A 94 and newer F truck with the 5.8 will have the distributor you need. Has to be newer though, otherwise the gear won't work with the roller cam. ( i think)

One with a steel gear would be what you seek. Also, the oil pump drive shaft...5.0's use a shorter shaft I believe, as well as smaller. I've got two different sizes in my pile 'o motors, and I only have 5.0 and 5.8 stuff.

I know I don't have any TFI dizzy's for a 351w though.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Looking for brackets and pullies....

Reply #19 –
Thanks Beau. The distributor was the only thing missing from the engine when I got it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #20 –
I *may* go to the yards next weekend...if I go, and meet a 5.8 truck, I'll nab the dist for ya.

9 wires, a TFI connector, and a bolt, and one yank, and it's outta there. I even have a magnet tool to fish out the oil pump shaft lol, provided it doesn't drop into the pan..
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Looking for brackets and pullies....

Reply #21 –
TFI connector? It just plugs into the TFI on the side of the distributor like our 5.0 does. Maybe I'm misunderstanding what you're saying. I don't want to go to a remote TFI.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #24 –
I checked for you in 3 different yards today, during my run earlier. Only found one solitary fox Cougar, and when I popped the hood the 5.0 was already gone. Didn't find anything that I needed either. Fox shiznit is getting  hard to find....

Looking for brackets and pullies....

Reply #25 –
Yep, super hard to find, and still has no actual cash value. I wish somebody would start making a few aftermarket pieces.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #26 –
vinnietbird are you still looking for pulleys and brackets? I have a throttle cable bracket from a fox body Mustang 5.0 which is identical to the 86 T-Bird one I found except for a small opening at the TV cable hole. I have a water pump pulley and crank pulley from a Mark VII 5.0. I also have an alternator bracket from a Fox body Mustang 5.0 but the ears for the air pump have been cut off.
[SIGPIC][/SIGPIC]
86 T-Bird V6 C5
91 F-150 5.0L 5spd
93 Mustang LX 351C C4
2013 Honda CRV AWD

Looking for brackets and pullies....

Reply #27 –
I didn't forget you. I'm going there this morning. Hopefully its still there.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +
 

Looking for brackets and pullies....

Reply #28 –
Like I said, no rush at all. I'm guessing this is a year long project. Thanks a lot Kitz. You da man.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #29 –
I pm'd you Vinnie.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +