Skip to main content ↑ ↓
Topic: Looking for brackets and pullies.... (Read 1615 times) previous topic - next topic

Looking for brackets and pullies....

Looking for the factory a/c-power steering bracket and the alternator bracket for a 5.0. Also, stock pullies. The alternator pulley isn't necessary, but the crank, steering pump,and waterpump pulley if possible.Cheaper the better. trade, whatever. let me know.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #1 –
Anybody got any T-Bird /Cougar 5.0 brackets?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #2 –
Still looking for the brackets.......
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

Looking for brackets and pullies....

Reply #3 –
I have those 3 brackets right now from an SO 5.0, which came out of an '87 Crown Vic. Not 100% sure if they are the same as the 5.0 Fox configuration though. If they are lemme know, and I'll dig em outta my parts bin and get some pics for you.

Looking for brackets and pullies....

Reply #4 –
The Crown Vic uses different pieces. I appreciate the offer though. A lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #5 –
My yard has 2 87 5.0 cougars its going to cost you, I don't like to get dirty.lol.......
Do you have any turbo coupe rear disc parts??
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Looking for brackets and pullies....

Reply #6 –
I have no disc parts at all. I wish I did. I'd be glad to pass them along. I need the brackets and associated pieces...bolts, tensioner, and a/c pieces (not the big black steel brace up front or the steel "rod" braces). What do you think you can get them for?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #7 –
Updated the needs list.......
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #8 –
I'll look I might have those from my car
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Looking for brackets and pullies....

Reply #9 –
Kep me posted. I'm working 12 hour shifts the next three days, so it'll be later before I get back. Thanks a lot, and no hurry.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #10 –
Let me check the 90 mustang I pulled my motor out of at Dad's the brackets might just be laying on the ground, I also think I have the front pulleys from a 2000 explorer but they are a bit different. V8 Ranger guys want them cause it bring everything super close to the motor. Will be this weekend before I get a chance to look.
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"

Looking for brackets and pullies....

Reply #11 –
I'm just wanting stock T-Bird/Cougar stuff. The alternator bracket from the Stang 5.0 would work, but not the a/c stuff.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for brackets and pullies....

Reply #12 –
so I have nothing in my attic, i will try to get to the yard this week
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Looking for brackets and pullies....

Reply #13 –
Vinnie, what do you need yet, I found a 87 TB last weekend , engine and everything was in it, If it's there tomorrow I'll grab what you need, I know pulleys are 5 bucks, i don't see prices for brackets but I'm sure there cheap, Let me know. It was pretty intact last Sunday,if anyone else might want something.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Looking for brackets and pullies....

Reply #14 –
I need a waterpump pulley,Crank, and steering pump. And the alternator bracket, and the power steering/ AC bracket pieces (No compressor, but the rest....bolts to if you can). I'll also take the throttle cable bracket and water pipes from the lower if you can get them. And, a trunk mat if it still has one in decent shape. Thanks Kitz !!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..