headers May 08, 2012, 01:30:01 PM ive got a 351w in a 88 tbird and the headers that are on the car really dont fit i had to crimp them on the drivers side to get them to fit by the steering rod. does anyone know what a good set of headers to put in there would be.? Quote Selected
headers Reply #1 – May 08, 2012, 01:54:16 PM I got a set of summit brand long tubes for my 302, may check them out and see if they have a 351. Its tight but they clear everything. Quote Selected
headers Reply #2 – May 09, 2012, 06:59:39 AM http://www.summitracing.com/parts/BBK-1511/ Quote Selected
headers Reply #3 – May 09, 2012, 09:42:16 AM Is it the large round part of the steering rod thatshiznitting the collector part or the shaft itself. I put an aftermarket shaft in cause it rubbed on the bbk longtube with chucks motor mounts. Quote Selected
headers Reply #5 – May 09, 2012, 01:31:42 PM Oh ok, mine washiznitting that larger 2-3" round part. I wouldn't put shorty's on it go with the bbk long tubes, http://www.summitracing.com/parts/BBK-1569/?rtype=10 Quote Selected
headers Reply #7 – May 10, 2012, 06:51:36 PM its barley rubbing but when i turn you can hear it and the shaft is showing some wear ive heard of people using headers that wrap around the steering colum has anyone does this? Quote Selected
headers Reply #9 – May 10, 2012, 08:39:05 PM there stock 1970 351w heads and the headers are made from hedman but idk they where on the 5.0 when i bought the car. Quote Selected
headers Reply #10 – May 10, 2012, 09:12:39 PM thats why they hit, they are designed for a 302 and are bent to fit that combo. The added deck height of the 351w is screwing you up, You need to just put headers designed for a 351w on the car Quote Selected
headers Reply #11 – May 11, 2012, 06:47:48 AM Quote from: Bob;389622thats why they hit, they are designed for a 302 and are bent to fit that combo. The added deck height of the 351w is screwing you up, You need to just put headers designed for a 351w on the car Which is why we've all posted links to bbk swap headers. Quote Selected
headers Reply #12 – May 11, 2012, 08:54:58 AM My headers wrap around the steering column, you have to cut the and turn the pipe, put in and tighten down. That last pipe being kind of independent from the other 3 make it interesting when starting bolts.. Quote Selected
headers Reply #13 – May 11, 2012, 12:52:19 PM okay im just trying to clerify i wanted to make sure smeones has put a 351w in thre tbird and used headers that just fit right in so your saying theese bbks will do that? Quote Selected
headers Reply #14 – May 11, 2012, 02:07:53 PM Are you sure the motor is centered correctly on the mounts? Quote Selected
Topic: headers (Read 3063 times)
previous topic - next topic
