Skip to main content ↑ ↓
Topic: cupholders?? (Read 3652 times) previous topic - next topic

cupholders??

anybody have a good mod or can suggest with a picture where to install a cupholder on 85-88 cougar birds?          i was thinking of putting one where the ashtray is..
-pete
july/88 turbo coupe auto

cupholders??

Reply #1 –
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

cupholders??

Reply #2 –
well, theres a couple mods going on there...
-pete
july/88 turbo coupe auto

cupholders??

Reply #3 –
Jerry, isn't that a cup/coin tray out of a Taurus 93-95?








1983 FORD THUNDERBIRD HERITAGE 5.0
2008 SAAB 9-7X AERO 6.0 (LS2) 1 0f 554 Made
2011 FORD FLEX SEL Family Hauler

cupholders??

Reply #4 –
Quote from: ramair351;388491
well, theres a couple mods going on there...

more then you can see in that pic...;)


the entire car is a mod from the frame up.... lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

cupholders??

Reply #5 –
Quote from: MY83T;388493
Jerry, isn't that a cup/coin tray out of a Taurus 93-95?

Not sure what year it came out of... Vinnie got me another for my 87...he would know
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

cupholders??

Reply #6 –
as long as we got on the subject of mods.....
this was my coolest mod ever.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

cupholders??

Reply #7 –
Quote from: daminc;388499
as long as we got on the subject of mods.....
this was my coolest mod ever.
The PRNDOL?

cupholders??

Reply #8 –
yep
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

cupholders??

Reply #9 –
Quote from: daminc;388507
yep

That's slick. Had to look real close to see what u were referring to. Mine's factory digital with automatic. I'm guessing yours was factory standard?

cupholders??

Reply #10 –
Some people build a cup holder into their console lid. I don't like that due to loss of an armrest when you have a drink. Having cup holder come out of the dash gets in the way of the radio. A cup holder in the middle can cause problems with the shifter if you have standard or automatic on the floor. Pick your poison. I will keep the automatic on the column and put the cup holder in the middle. Plan on making a custom console with it in there. Not sure yet where I will locate the window and seat switches.....

cupholders??

Reply #11 –
[thread]31743[/thread]

Here is what I did. I have since put some filler in the edges but I still haven't painted it. It works great.
--SteveN 👍
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L

cupholders??

Reply #12 –
I have a different approach....










1983 FORD THUNDERBIRD HERITAGE 5.0
2008 SAAB 9-7X AERO 6.0 (LS2) 1 0f 554 Made
2011 FORD FLEX SEL Family Hauler

cupholders??

Reply #13 –
Quote from: Chrome;388508
That's slick. Had to look real close to see what u were referring to. Mine's factory digital with automatic. I'm guessing yours was factory standard?

 
originally it was a digi speedo cluster and an auto.... it got swapped over before I got it, but you never knew what gear you were in... so I added that... the cupholders were also in the car too. I redid how they were mounted... Pop cans never get in the way of the radio...and larger cups really don't fit in them, but it works for what I need, when I need it
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

cupholders??

Reply #14 –
Quote from: daminc;388497
Not sure what year it came out of... Vinnie got me another for my 87...he would know

 
Yep, Taurus. I need to start grabbing all of those I see. for everyone.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..