Skip to main content ↑ ↓
Topic: Need help FAST !!!!! FIXED !!!! (Read 28769 times) previous topic - next topic

Need help FAST !!!!! FIXED !!!!

Reply #240 –
I pulled the stereo, a/c controls, and sentry panel. No sign of a bad wire anywhere I can see. Maybe it's in the cluster. I'm getting a replacement soon. Car funds are gone, acquiring more as we speak. EVERYTHING works except the two outer passenger side signal lights.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Need help FAST !!!!! FIXED !!!!

Reply #241 –
Vinn
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Need help FAST !!!!! FIXED !!!!

Reply #242 –
Possibly the burned up wire could not be allowing enough voltage for the sequencer to sequence. Too bad U don't have a DVOM.

Need help FAST !!!!! FIXED !!!!

Reply #243 –
I'll try to back probe the wire I repaired tomorrow. Maybe it is the sequencer. I don't know how to check the sequencer. Yes, it's wired right. It's been wired for a few years, and as of last month, all the lights were working. I was showing them to a Stang guy. It all happened after the core swap. SO, I still have to figure out the outer two lights.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Need help FAST !!!!! FIXED !!!!

Reply #244 –
The burned up wire is repaired, but still no outer lights.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Need help FAST !!!!! FIXED !!!!

Reply #245 –
Vinny
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Need help FAST !!!!! FIXED !!!!

Reply #246 –
Vinnie, what lights are out exactly.... parking lamps? front and back? or all ?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Need help FAST !!!!! FIXED !!!!

Reply #247 –
If that sequencer is made with solid state electronics it didn't stand a chance of surviving a short like that.

Need help FAST !!!!! FIXED !!!!

Reply #248 –
If TC was right, and front turn signal and rear turn signal are two different circuits, it makes me wonder what caused the short in the rear wiring.

Need help FAST !!!!! FIXED !!!!

Reply #249 –
The exact light issue Jerry is the outer two rear passenger lights. That's it. Everything else is great. I have no idea unless it is the sequencer.

As far as what caused it, who knows/ Probably sliding the dash back in place and compromised a wire. All I can figure.

The rest of the lights, inside and out are working as they should. Only those two are inop.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

Need help FAST !!!!! FIXED !!!!

Reply #250 –
are those the running, and side marker lamps?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Need help FAST !!!!! FIXED !!!!

Reply #251 –
Just the two outer brake lights.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Need help FAST !!!!! FIXED !!!!

Reply #252 –
no lights on at all..
even with brake on, or with lights on?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Need help FAST !!!!! FIXED !!!!

Reply #253 –
No brake lights. They come on with the headlights. Just no brake lights, or emergency flashers. When the brake pedal is pressed, only the inner light comes on.

When the signal light is turned on (passenger side), only the inner light comes on.

When the emergency flashers are on, only the inner light comes on.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Need help FAST !!!!! FIXED !!!!

Reply #254 –
i'm willing to bet it's the sequencer.. i know, i sound like a broken record lol.. but if your inner most light is working, your sequencer IS getting the turn/stop signal from the front of the car.. at this point, it makes more sense than anything else. without a doubt, the sequencer is getting signal, but it's not sequencing.. it's a shame those things are hard-wired and not set up to plug in.. if that was the case, you could swap the driver side sequencer in and i bet all 3 bulbs would light up.. if i had a sequencer, i would send it to you to try out, but.. i don't
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver