Skip to main content ↑ ↓
Topic: I need a cutout of a 5 speed shifter hole!!!! (Read 1248 times) previous topic - next topic

I need a cutout of a 5 speed shifter hole!!!!

Hey guys I need a measurement of the opening, since mine is highly modified due to the B&M shifter, pretty much i need the template of the hole for the stick
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

I need a cutout of a 5 speed shifter hole!!!!

Reply #1 –
I cut mine out for the aod, then put the 5spd. in and it worked out. If it helps here's the diagram for the aod, I don't think it needs to be as big of a whole.
http://www.coolcats.net/media/docs/shifter_template.pdf
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

I need a cutout of a 5 speed shifter hole!!!!

Reply #2 –
Problem solved!!!!!
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/