Skip to main content ↑ ↓
Topic: cam opinions... (Read 3982 times) previous topic - next topic

cam opinions...

88 Tbird, "P" motor aftermarket shorty headers dual exhaust, 3.55 gear w/aod, 77mm mass air, 24# injectors. E cam or Trick flow Stage  1 ?:hick:
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #1 –
tfs1, all day if thats your only choice.

Id check ptv REAL carefully.
87 Thunderbird LX
65mm tb, exploder intake, iron gt40 heads, 1.6 rr, a9l mass air swap, 9.5" Billet Dirty Dog TC, Built AOD, 4.10's, 31 spline TLoc, Superior Axles, full sn95 five lug swap.

cam opinions...

Reply #2 –
Quote from: mtgmike;363659
tfs1, all day if thats your only choice.

Id check ptv REAL carefully.

Well those were the 2 I was thinking about, you have any other suggestions? Thanks.
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #3 –
Stock converter?  HO cam.

cam opinions...

Reply #4 –
I'm gonna look into getting a converter, just have to decide on which one...lol.
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #5 –
Would a 2400 stall converter work for a daily driver?
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #6 –
I wouldn't be afraid of it.  Looser converters provide great thottle response.

cam opinions...

Reply #7 –
I just bought a Dirty Dog, I just didnt want to risk my trans with a B&M.

waiting on the aod to get finished for install.
87 Thunderbird LX
65mm tb, exploder intake, iron gt40 heads, 1.6 rr, a9l mass air swap, 9.5" Billet Dirty Dog TC, Built AOD, 4.10's, 31 spline TLoc, Superior Axles, full sn95 five lug swap.

cam opinions...

Reply #8 –
If you do a stall, and gear, just make sure to add an after market trans cooler!
I'm biased to the tfs stage 1 :D
[video=youtube;w9tgOV8opGQ]http://www.youtube.com/watch?v=w9tgOV8opGQ[/video]
 

cam opinions...

Reply #9 –
Nice sounding car!!!!  Thanks for the advice on the cooler, definitely leaning towards the TFS-1.
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #10 –
I've had the E-303 and now the TFS-1. I like the Trick Flow cam better. That video above sounds very similar to my engine. I also have the "P" engine. Make SURE you swap the valve springs. The Sport has tons of torque and can rev high when it wants to without breaking a sweat. Nice lopey idle, and still, decent gas mileage.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

cam opinions...

Reply #11 –
Quote from: vinnietbird;364970
I've had the E-303 and now the TFS-1. I like the Trick Flow cam better. That video above sounds very similar to my engine. I also have the "P" engine. Make SURE you swap the valve springs. The Sport has tons of torque and can rev high when it wants to without breaking a sweat. Nice lopey idle, and still, decent gas mileage.

Awesome!!
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

cam opinions...

Reply #12 –
Quote from: cougarman;363699
Would a 2400 stall converter work for a daily driver?

I'm running a 2800 stall non-lock up converter and I've got great throttle response. The guy who did my trans said it would be perfect for my car since it's heavier than a Mustang and he was right. The higher stall converters just feel a bit disconnected at speeds below their stall rating. It's a bit hard to describe but if you've driven a car with a higher stall converter you'll see what I mean.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

cam opinions...

Reply #13 –
Just ask Vinnie! he try's everything at least once a week.lol
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

cam opinions...

Reply #14 –
Quote from: Kitz Kat;364985
Just ask Vinnie! he try's everything at least once a week.lol
:rollin::rollin::rollin::rollin:
Fox-less at the moment