Skip to main content
Topic: Trunk striker bushing? (Read 883 times) previous topic - next topic

Trunk striker bushing?

Guys,

Do the trunk strikers have a similar bushing to the doors(87 btw)? I was wiring up my back speakers, and for the first time noticed my trunk doesnt latch very well. There is no sound to let you know it latches, it either bounces back up, or it stays down. The striker was wrapped in electrical tape, looks like this now:



The typical HELP bushings for doors are much too large.
87 Thunderbird LX
65mm tb, exploder intake, iron gt40 heads, 1.6 rr, a9l mass air swap, 9.5" Billet Dirty Dog TC, Built AOD, 4.10's, 31 spline TLoc, Superior Axles, full sn95 five lug swap.

Trunk striker bushing?

Reply #1
That's what mine looks like. Maybe the latch is at fault. Spray some lube on it and see how that works. Also, you may need to adjust the striker. It moves up and down.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Trunk striker bushing?

Reply #2
10-4, thanks for the fast response!
87 Thunderbird LX
65mm tb, exploder intake, iron gt40 heads, 1.6 rr, a9l mass air swap, 9.5" Billet Dirty Dog TC, Built AOD, 4.10's, 31 spline TLoc, Superior Axles, full sn95 five lug swap.

Trunk striker bushing?

Reply #3
No worries.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Trunk striker bushing?

Reply #4
Also the 2 rubber stoppers may be in too far...turn them out a bit at a time to get the trunk lid to sit proper in relation to the body line, then carefully adjust the latch etc
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Trunk striker bushing?

Reply #5
Good thought.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..