cluster swap

Topic: cluster swap (Read 4328 times) previous topic - next topic

Reply #15 – May 01, 2012, 03:47:37 PM

I remember a while back I saw a big diagram on how to do a swap for the premium digital cluster...any idea where I could find something like that? As long as I know that it IS doable, thats all I need

cluster swap

Reply #16 – May 03, 2012, 07:11:27 PM

There's no diagram for the direct swap, but you can modify these two to get what you need

You will need to convert this one

http://www.coolcats.net/media/docs/base_to_tc_cluster.pdf

to this one, and then reverse the swap because this is for buttstuffog to digital, you need to do it backwards, digital to buttstuffog

http://www.coolcats.net/media/docs/electronic_to_tc_cluster.pdf

cluster swap

Reply #17 – May 03, 2012, 07:17:10 PM

Actually the easiest way would probably be to take the information from these two pages and figure it out yourself and use the above links for general reference for things you might not be sure of:

http://www.coolcats.net/general/8588base.html

http://www.coolcats.net/general/8588digital.html

To get the right side of the digital cluster to work you will have to add wiring to your computer, the same way you wire up a tripminder, since that's what it is:

http://www.coolcats.net/modifying/tripminder.html

The amp/fuel/oil/temp guage should all work properly but you will have to change the sensors for the fuel and oil guages.

cluster swap

Reply #18 – May 04, 2012, 01:43:16 AM

well this certainly gives me something to go on, thanks!