Skip to main content ↑ ↓
Topic: 5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness (Read 717 times) previous topic - next topic

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

#1: a pair of 5 lug axles from a '97 Mustang. Just the axles. 40 bucks.

#2: pair rear TurboCoupe rotors, one is new, IIRC. 20 bucks for both

#3: pair rear TC calipers (one is seized, for core or s, pretty much) 20 bucks OBO

#4: Both rear TC axles. Just the axles, 40 bucks.

#5: 1988 engine harness. removed carefully, no broken or cut wires as far as I can tell.
150 shipped, price neg. Ready to go in the mail. Pics available.

And if someone is looking for one, I have an EEC from a '91 5.0 Mark VII that I may let go.
PM if interested.

Just tryin to put a little money together to finish my rear-end setup.
Going to go with ranger axles and drum brakes...all the stuff listed above is useless to me :D

Prices do NOT include shipping...I'll combine shippin' if someone wants more than one item(s)
Paypal accepted.
All parts located in Laclede, Missouri. cell is 660-734-3934. texts or calls fine. *(not responsible if pizza hut answers...)

I'm open to offers as well, and pics on request. Thanks folks :D:bowdown:






*inside joke
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)
 

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #1 –
You have PM
Fox-less at the moment

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #2 –
Bumpage. prices are flexible
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #3 –
Bump again...someone could use this, I'm sure :)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #4 –
Do you have an axle shaft that has no wear on the bearing surfaces? I need one. TC shaft is fine.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #5 –
Vinnie, I'd have to pull it to see...the TC axles are still under the Sport, if you can wait a few days, I'll try my edest to get them out during the week.

By the way, don't you have drums on the back of yours, or are you using the TC disc set-up?
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #6 –
Drums. I have TC axles, just removed the rings. I just need a good axle preferably from a driver side. Don't get in a hurry. I'm weeks away from even messing with the differential, and, I'm still gathering funds....... I have a new girdle for it as well. I've got a lot to do as it is. Get my hood, swap on the new headers and motor mounts, get my radiator replaced that FedEx lost and the place I bought the company from is not helping....they will, though, or I'll go through PayPal and get my money back, and a few other things on the to-do list.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #7 –
Ok Vin, when I change out my axles I'll mark and set aside the driver's side for ya if it's good.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #8 –
Sweetness. Thanks a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #9 –
Do you have a trunk lid in nice shape? I need one for cheap.....or maybe trade....who knows.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #10 –
I have an idea for packaging it and the axle together for easy shipping.....if you have one.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #11 –
If I had a nice trunk lid, it'd be on the sport now..lol

The one I have on now looks like a hail storm went nuts on it, but at least it isn't rusty in the seams like the stock one was.

If i'd have known you were needing one, I woulda checked out the pair of fox birds I saw yesterday...
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #12 –
I'll find one. I haven't really put any effort into looking yet. Usually when I really try to find something.....I do.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #13 –
What do you think you'd need, moneywise, to snag me the rear rotors, calipers, backing plates, and hardware from a '94-98 Stang...mainly looking into cost right now, but it could come to be a thing I need to do, given the scarcity of said parts here...I have the axles already, so won't need those.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

5 lug axles, rear TC rotors/caliper/axles/new brake pads/'88 5.0 engine harness

Reply #14 –
My friend bought the rear of the Sn-95 stang that was out there (a GT) for his '68. He's holding on to all of it. I'll see what I can find and we'll see what we can work out. Still need the calipers?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..