95 3.8 Transmission question February 04, 2011, 01:12:29 PM I've got a 95 Coug with a 3.8l in it. The transmission is jacked but i have transmission out of a 96 3.8l mustand. What type of modifications do i have to do in order to get this transmission to work.Thank youBrendon Quote Selected
95 3.8 Transmission question Reply #1 – February 04, 2011, 01:17:54 PM Try here: http://www.tccoa.comThey deal with your car, which is a MN-12. We deal with FOX Thunderbirds and Cougars, which are different animals . Quote Selected
95 3.8 Transmission question Reply #2 – February 04, 2011, 01:34:45 PM The first mod would be to actually do some research, instead of just popping in and asking someone to tell you what you need to do.Glad you found the site and all, but don't be lazy. Quote Selected
95 3.8 Transmission question Reply #3 – February 04, 2011, 08:07:57 PM If they're both autos they should swap right over. Quote Selected
95 3.8 Transmission question Reply #4 – February 05, 2011, 01:00:39 AM Yeah, they should be the same transmission. I'm not sure if the lengths are any different or anything like that though. Quote Selected
95 3.8 Transmission question Reply #5 – February 05, 2011, 06:35:29 AM Nope. Same exact trans. Just make sure you reuse EVERYTHING that is attached to the one in your Cougar and you should be fine. And don't forget to mark your driveshaft at the axle before you remove it. Quote Selected
95 3.8 Transmission question Reply #6 – February 15, 2011, 10:38:37 PM I can get you a 4R70W & the computer that was in the car with it, if you'd like to go that route. Quote Selected
Topic: 95 3.8 Transmission question (Read 2001 times)
previous topic - next topic
