Tubular K-member

Topic: Tubular K-member (Read 1435 times) previous topic - next topic

Tubular K-member

January 15, 2011, 12:02:51 AM

Needs me some feedback on them. Ive got a granatelli kit in the works for the 87 tbird I was wondering who all had the tubular kmembers and if they had any fitment issues or any guidence for when I start tackling the swap.

Input is appreciated

Clayton

Tubular K-member

Reply #1 – January 15, 2011, 07:47:24 AM

There are a few guy here that have them, I think you need spacers where it mounts to the lower part of the sub-frame. I could be wrong, I dont have one, but I did reseach it cause I was thinking about it also.

Tubular K-member

Reply #2 – January 15, 2011, 04:04:49 PM

Here's some info here that may help ya out :-)

Tubular K-member

Reply #3 – January 15, 2011, 05:49:06 PM

I made my own K member and arms. But even using a stock one as a jig i still ended up using spacers.
Most K members i have seen have been 95% fit with a little tinkering.

Tubular K-member

Reply #4 – January 15, 2011, 06:57:21 PM

thats cool. i just had a few questions. i knew they didnt fit quite right and had to be trued up.

thanks for the input

Tubular K-member

Reply #5 – January 15, 2011, 07:28:27 PM

That is why i made my own K member.